What are the Operating Procedures of the Row Welding Machine?

As a Row Welding Machine Manufacturer, share with you.

The level of machinery use in a country directly reflects the level of modernization in that country. Free up productivity and let dull and repetitive movements be done by machinery. Looking forward to the near future, the mechanization and automation boom will sweep across China. With the rapid development of China's manufacturing industry and the comprehensive development of infrastructure, high-speed railways, highways, bridges, mines, and new urban and rural construction will use a large number of steel mesh. We often see that a large number of workers are strapping steel bars under the scorching sun and bracing the heat, and dripping into the ice and snow are still working hard on high scaffolding. Manually bundling reinforcement meshes has low efficiency, high cost, high labor intensity, difficult to guarantee quality, and harsh working environment. Social and economic development and progress, and widespread use of mechanization, the production of reinforcement meshes must be produced by Row Welding Machine instead of manual bundling.

Heavy Pneumatic Mesh Welding Machine

Principle: Welded wire mesh machine adopts power electronics synchronization technology. The sub-control welding and welding time are controlled by digital circuit. The control precision is high, the performance is stable, the welding point is firm, and there are no burn marks. The weft thread needs to be straightened and cut by a straightening machine and placed in a blanking mechanism. The mechanism is controlled by a stepper motor and automatically takes material from the hopper. The blanking is uniform and accurate. No need to trim. The stretched net uses elastic pull rods and grid positioning devices to make the fine adjustment of the grid easy, the grid size precision is high, and the welding can be arbitrarily adjusted within the specified range. The welding speed of this machine is fast, only two people can complete the operation, easy to learn.

Correct operation regulations: ① The operator must study carefully, and then can grasp the structure and performance of the equipment very clearly, and be more familiar with the operation regulations of the machine. ② Operators need to prepare work clothes, wear protective gloves, wear insulated shoes, and prepare comprehensive protective measures. ③ The operator must correctly use the work buttons and control devices on the equipment, and cannot modify various parameters that have been set on the control cabinet. ④ Check that each machine part and protective device such as transmission, lubrication, connection, etc. on the machine are operating normally. Check that the fixing screws of the upper and lower electrode parts on the machine are firm and must not be loose. ⑤ Before the machine is working, check whether the cooling water is normal, whether the surface of the electrode head and other components have been cleaned, whether there are foreign matters and dirt on the surface of the workbench, and whether the lubricant is lacking and needs to be added. The equipment cannot be operated under water and oil shortage conditions.

Our company also has Heavy Pneumatic Mesh Welding Machine on sale, welcome to consult.