What is the difference between a Glue Dispensing Machine and an Adhesive Dispensing Machine?

Dispenser equipment is generally used in high-precision glue control operations. The dispenser requires very high progress and is a small amount of glue control operation. The type of glue applied by the dispenser is mostly a single-component glue. The glue is a two-component glue, which is mixed and mixed. The 2 Components Automatic Potting Machine is mainly used for filling and sealing with the large flow. The glue machine does not require high positioning accuracy.

2 Components Automatic Potting Machine

As an Adhesive Dispensing Machine Manufacturer, I would like to share with you all the above: Dispensing machines are generally a small amount of accurate dispensing, while glue filling machines are generally a large number of products. Electronic components are relatively precise; the products of the glue, dispenser is generally relatively large.

The dispenser is also known as glue applicator, glue dispenser, glue dispenser, glue dispenser. It is an automatic machine and equipment that controls fluid and drips, coats, and seals liquid on the surface or inside the product. The dispensing machine is mainly used for the precise dispensing, pouring, pouring, coating and dripping of glue, paint and other liquids in the production process to the precise position of each product. It can be used to achieve dots, lines, circles or arcs.

Maintenance method of Glue Dispensing Machine

The daily maintenance of the dispenser will directly affect the life of the dispenser. The daily work of the dispenser maintenance has a great impact on the service life of the dispenser, including the smoothness during normal use. The following are the routine maintenance procedures for the dispenser:

1. To change the rubber type, the pipeline needs to be cleaned. At this time, first, close the feed valve, open the discharge valve, and discharge the remaining rubber in the plastic bucket. Close the discharge valve and open the feed valve to pour the cleaning solvent into the plastic storage bucket, activate the body, and press the solvent according to the usual operation method. Rinse out.

2. The air pressure intake is abnormal and water vapor is found. Please remove the water vapor in the pressure-regulating filter or check whether the air pressure source is abnormal. Before the glue is used in large quantities, please try it in small quantities and master the use of the product to avoid errors. When there is no problem in the test, use a two-drop glue dispenser or a two-liquid glue dispenser for mass production; The vacuum system performs vacuum defoaming treatment on the glue to eliminate bubbles generated during the stirring process or stand for 10-20 minutes before use so that the bubbles generated during mixing are eliminated in time, and the more the amount of glue mixed together.

3. Please wipe the machine part regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so it is necessary to reasonably mix the glue according to the actual production situation, otherwise it will cause a waste of glue. Today, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.

4. Unplug the power supply when the machine is inactive for a long time. This will not only extend the life of the machine but also save a lot of electricity costs.

Note: The dispenser should be cleaned after each use. Wipe the place where you can see it and wipe it with alcohol. It is best to apply oil or butter to the frequently moving parts to keep it lubricated. The glue is polished, otherwise it will solidify in the dispenser and need to be cleaned.