How the brake works on horizontal lathes

The major feature of the braking gadget of the CNC horizontal lathe is to be utilized in the vehicle parking procedure of the turret, to conquer the rotational inertia of the moving parts in the head supply, and to manage the pin to quit revolving rapidly to reduce the complementary time as well as to install the brake of the horizontal lathe.

The CNC horizontal lathe uses a brake band brake, which is generally composed of a brake wheel, a brake band, as well as a bar. The brake wheel in the brake device is a steel disc splined with the shaft. The steel brake band is fixed on the inner side with a layer of steel mesh asbestos to increase the coefficient of rubbing. One end is connected to the pin box and also the other end is fixed to At the upper end of the lever, the brake band of the horizontal lathe can be changed tightly, and it can be put and changed by straight loosening up the spiral attaching the brake band and the pin box. When the CNC horizontal lathe is readjusted appropriately, the brake band can be released when the major shaft turns, yet when the clutch is in the released state and also the straight turret is stopped, the brake band will hold the brake wheel to realize the rapid stop of the primary shaft, the brake is gotten to.

Running policies and safety measures for horizontal lathes machine:

Examine whether all components are in good condition prior to driving. After the chilly vehicle is begun, the vertical shaft needs to be idling at a low rate for 2-20 mins. It is specifically essential to make use of lubricating oil to spread almost everywhere in winter season. Await the turret to work generally.

When the vertical shaft needs to change rate throughout job, it needs to quit and alter speed.

To make certain the precision of the screw pole, it is not allowed to make use of the lengthy screw rod for automatic feeding besides threading.

It is not enabled to knock on the chuck or the bed overview rail to fix the job item or tools on the bed surface.

When the pad clamp is utilized to fix the much heavier job piece, a wood board must be used to shield the bed surface area. If the job piece can not be eliminated after leaving work, it requires to be supported by a jack.

After the transforming device is worn out, sharpen it in time.

When making use of cutting liquid, lubricate the guide rails in breakthrough. The cutting liquid in the air conditioning pump need to be replaced frequently.

When the device tool is running immediately, the body as well as hands need to not enter the activity series of the device.

Just validate that the protective door is securely closed and locked prior to handling. Don't unlock throughout automatic operation.

The spindle speed need to not exceed the limit speed allowed by the chuck. High speed will certainly minimize the clamping pressure.

When the chuck is going for broadband, the job piece must be secured to avoid the work piece from being thrown out throughout procedure.

Work pieces and also devices have to be secured strongly and also reliably. Inappropriate securing force will certainly cause the work item to fly out and also cause casualties.

Do not overload cutting when processing the work item.

Do not get rid of or customize the safety defense device equipped with the machine tool. The horizontal lathe machine tool can just be operated when all the safety protection gadgets function typically.

When the equipment device is mounted, repaired, or adjusted and checked, a certified or expert maintenance person must remove as well as lock the power supply prior to upkeep according to the instructions in the maker device manual.

After the job is finished, eliminate the chips and cutting liquid on and also around the turret, as well as include lubricating oil according to the defined parts after cleaning the turret.

When you get off job, roll the large carriage up until the turning takes care of at the end of the bed are set to premium settings, and shut off the power.