What Should be Paid Attention To When Using The Bag Making Machine?

Nowadays, there are many kinds of packaging bags. In today's interconnected society, the demand for packaging bags is increasing. Fully Automatic Bag Making Machine is a fully automated bag making equipment, from the input of raw materials to the forming of packaging bags. The processes are all done automatically. What production processes and precautions are included?

Flat Bag Making Machine

 1. Before turning on the Flat Bag Making Machine, you must check whether there is dust and debris around it, and remove them; enter the relevant data of the bag making and the required number of each bag one by one; try to choose a pattern with larger color difference Adjust the sensitivity of the optical eye on the left and right edges to meet the requirements.

2. The main motor of the bag making machine runs at low speed, and then adjusts the edge position control to halve the film in the middle position; at the same time, adjust the left and right nip rollers of the bag making machine to align the left and right films, and adjust the front and back clamps. Roll to align the pattern.

3. During the production process, if it is found that the bag making of the automatic bag making machine is abnormal, it must be adjusted immediately. The quality inspector is required to conduct an inspection, and after passing the inspection, a certificate of conformity is attached and sent to the quality inspection room for random inspection. Organize the bags produced, remove the bags with quality defects, and bundle them according to regulations.

4. Immediately load the film roll according to the production requirements, adjust the size of the bag, install the heat-sealing knife, and initially adjust the positions of the slitting knife and the heat-sealing knife. After everything is ready, you can turn on the power of the bag making machine and set the temperature of the heat-sealing knife according to the process requirements.

5. After the whole bag-making work is completed, the main power switch of the Bag-Making Machine needs to be disconnected, and then the power switches of each part should be disconnected. The staff do a good job of the relevant foundation and clean the bag making machine to keep it in a clean and good condition

If you have any questions during the operation of the equipment, you can call us at any time to communicate and solve