How does the Excavator operate correctly?

As a Komatsu Bucket Teeth Wholesale, share with you.

Proper walking operation

While the excavator is walking, try to pack up the working device and approach the center of the body to maintain stability; put the final drive behind to protect the final drive. Try to avoid driving over obstacles such as tree stumps and rocks to prevent the track from twisting; if you must drive over obstacles, make sure that the center of the track is on the obstacle. When crossing the mound, always support the chassis with a working device to prevent the vehicle body from violent shaking or even tipping. It should be avoided to stop the engine idling for a long time on the steep slope, or it will cause poor lubrication due to the change of oil level angle. Long-distance walking of the machine will cause the roller wheel and the final transmission to generate high temperature due to long-term rotation, reduce the viscosity of the oil and cause poor lubrication. Therefore, the machine should be frequently stopped to cool down and prolong the life of the lower body. It is forbidden to carry out excavation operations by the driving force of walking, otherwise, the excessive load will cause early wear or damage of the final drive, track and other disembarking components. When walking uphill, the driving wheels should be behind to increase the adhesion of the ground contact tracks. When driving downhill, the drive wheels should be in front to tighten the upper tracks to prevent the vehicle body from sliding forward under the force of gravity when stopping, which may cause danger. When walking on a slope, the working device should be placed in the front to ensure safety. After parking, gently insert the bucket into the ground and put a stop under the track. When turning on steep slopes, slow down the speed. Turn the left crawler backward when turning left, and turn the right crawler backward when turning right. This can reduce the danger when turning on the slope. We have Komatsu Bucket Teeth on sale.

Komatsu Bucket Teeth

Correct crushing operation

First, place the hammerhead vertically on the object to be broken. When starting the crushing operation, lift the front car body about 125px. When crushing, the crushing head should always be pressed on the crushed object. After the unbroken object has been crushed, the crushing operation should be stopped immediately. When braking, the vibration will gradually change the direction of the hammer head, so the bucket cylinder should be adjusted at any time so that the direction of the hammer head is perpendicular to the surface of the broken object. When the hammer can't hit the broken object, the broken position should be changed. Do not continue to break for more than one minute in the next place, otherwise not only the hammer will be damaged, but the oil temperature will rise abnormally. For hard objects, it should be broken gradually from the edge. It is strictly forbidden to break while turning, use the hammer to twist, insert the hammer horizontally or upwards, and use the hammer as a chisel.

The above is organized by Xiaobian. The operation and use of skills of the excavator are more popular. They are some common skills in the use of excavators. Many experienced machine friends have long been aware of it, but novices must learn more, Practice a lot to get your excavator up and running as soon as possible.

Our company also has Komatsu Bucket Adapters on sale, welcome to consult.