Aluminum-Plastic Composite Board Performance

Super peel
The aluminum-plastic composite board adopts a new process to improve the most important technical index of the aluminum-plastic composite board-peel strength to an excellent state, so that the flatness and weather resistance of the aluminum-plastic composite board are improved accordingly.
Material easily processed
The weight of aluminum-plastic panel is only about 3.5-5.5 kg per square meter, so it can reduce the damage caused by the earthquake disaster, and it is easy to carry. Its superior constructability requires only simple woodworking tools to complete cutting, cutting and planing. The various shapes of the sides, curved into arcs, and right angles can cooperate with the designer to make various changes, and the installation is simple and quick, and the construction cost is reduced.
Excellent fire performance
In the middle of the aluminum-plastic board is the flame-retardant material PE plastic core material, and the two sides are extremely difficult to burn aluminum layer. Therefore, it is a safe fireproof material that meets the fire resistance requirements of building regulations.
Impact resistance
It has strong impact resistance, high toughness, no bending damage to the topcoat, strong impact resistance, and no damage due to wind and sand in areas with large wind and sand.
Super weather resistance
Because the PVDF fluorocarbon paint based on KYNAR-500 is used, it has unique advantages in weather resistance. It does not damage the beautiful appearance in hot sunlight or cold wind and snow, and it can be up to 20 years. fade.
Uniform coating, diverse colors
After the formation treatment and the application of Henkel’s film technology, the adhesion between paint and aluminum-plastic board is uniform and the colors are diverse, allowing you to choose a larger space and show your individuality.
Easy to maintain
Aluminum-plastic panels have improved significantly in terms of pollution resistance. The urban pollution in our country is relatively serious. It needs to be maintained and cleaned after several years of use. Due to its good self-cleaning property, only neutral detergent and water are needed. After cleaning, the plates will be permanently new.
Easy to process
Aluminum plastic board is a good material that is easy to process and shape. It is also an excellent product for pursuing efficiency and time. It can shorten the construction period and reduce costs. Aluminum-plastic panels can be cut, cut, slotted, band sawed, drilled, processed, countersunk, cold bent, cold folded, cold rolled, riveted, screwed or glued.
1. Good weather resistance, high strength and easy maintenance.
2. Convenient construction and short construction period.
3. Excellent workability, heat insulation, sound insulation and excellent fire performance.
4. Good plasticity, impact resistance, can reduce the load of the building, good shock resistance.
5. Good flatness, light and firm.
6. There are many colors to choose from.
classification
There are many varieties of aluminum-plastic panels, and it is a new type of material, so there is no unified classification method so far, usually classified according to use, product function and surface decoration effect.
Classified by use
a. Aluminum-plastic board for building curtain wall
The minimum thickness of the upper and lower aluminum plates is not less than 0.50mm, and the total thickness should not be less than 4mm. The aluminum material should meet the requirements of GB/T 3880. Generally, aluminum alloy plates of 3000 and 5000 series should be used, and the coating should be fluorocarbon resin coating.
b. Aluminum-plastic panels for exterior decoration and advertising
The upper and lower aluminum plates are made of rust-proof aluminum with a thickness of not less than 0.20mm, and the total thickness should not be less than 4mm. The coating is generally fluorocarbon coating or polyester coating.
Classification by product function
a. Fire board
The flame-retardant core material is selected, and the combustion performance of the product reaches the flame-retardant grade (B1 grade) or non-combustible grade (A grade); at the same time, other performance indicators must also meet the technical specifications of aluminum-plastic panels.
b. Antibacterial and mildew-proof aluminum-plastic board
The coating with antibacterial and bactericidal effect is coated on the aluminum-plastic board to make it have the function of controlling the propagation of microorganisms and finally killing bacteria.
we provide aluminum composite panel and corporate sign aluminum composite panel,you can know it.