General Troubleshooting of Bag Packing Machine

Author:packstec 2026-09-04 10:24:14 13 0 0

Error messages record issues with the bag packing machine as well as securing equipment. Prior to digging right into the specifics of the issue, ask yourself these 4 basic concerns:

  • Is the device supplied with an adequate amount of bags?

  • Is the machine set up in the right atmosphere as specified?

  • Are there any types of concerns with an item or bag loading?

  • Exist any other variables that may trigger possible issues with the equipment, item, or bags?

If the setting, humidity degrees, or temperature level in your center are different from what the packing maker was produced for, this can cause breakdowns. Additionally, checking off the obvious reasons before you start thorough troubleshooting can conserve your time as well as sources. If the above questions don't reveal anything uncommon, you can go on to even more certain premade pouch equipment troubleshooting, starting with 3 common issues as well as their possible reasons below:

 General Troubleshooting of Bag Packing Machine

KEEP IN MIND: These are basic suggestions. Your machine might not have all functions noted. Consult your owner's manual or equipment manufacturer's solution department for fixing particular to your maker.

 

1. Bags are not feeding

This error means the pouches are not being fed appropriately to the machine.

 

Possible causes:

International body in tube or hose pipe damage

Air valve or solenoid valve trouble

Vacuum generator difficulty

Vacuum cleaner pad malfunction

Sensor is dirty

 

2. Bags fall short to open up

This mistake indicates the machine is unable to open up the bags after they are filled.

 

Possible reasons:

Vacuum cleaner pad break down

The bag is drooping or packed incorrectly

Air valve or solenoid valve problem

Filter requires changing

Timings are incorrect

 

3. Bag seals are defective

This mistake indicates plan seals are wrinkled, uneven, or weak.

 

Possible causes:

Sealing bar temperature is too expensive

Sealing bar stress is incorrect

Securing bar surface is scraped or unclean

The bag is not centered or degree in grippers

Packing equipment troubleshooting as well as upkeep

 

We are a bag packing machine supplier, please contact us if you need them.


Comments   Please sign in or sign up to post.

0

0 of 500 characters used

Copyright:@2020-2021