Hot-Dipped Galvanized Wire

Hot-Dipped Galvanized Wire with Shining Surface - 1.6mm to 2.5mm

High-quality steel wire with bright, glossy finish suitable for industrial and construction applications.

• Wire Diameters: 1.6 mm, 2.0 mm, 2.5 mm

• Surface Finish: Special post-galvanizing wipe or skin pass applied for smooth, reflective, gloss-like finish.

• Corrosion Resistance: Zinc Coating 50-100 g/m2
  

• Base Material: Wire produced from low-carbon SAE 1006 steel for uniform mechanical properties.

• Quality Inspection: SGS Certified
  

• Tensile Strength: 400-500 MPa

• Coil Weight: 500-700 kg
  

• Application Areas: Construction, Fencing, Industrial Use

• Manufacturing Process: Hot-Dip Galvanizing + Surface Wipe, Post-galvanizing treatment enhances smoothness and reflective shine compared to standard matte spangle.

• Packaging: Industrial Coils,delivered in tightly wound coils for storage, handling, and easy installation on site.

Hot-Dipped Galvanized Steel Wire for Greece and European Customers

High-quality steel wire coated with zinc for corrosion resistance and long-term industrial use.

• Wire Diameters and Sizes: 0.90, 1.25, 1.60, 2.00, 2.50, 3.05 mm to suit diverse applications.

• Zinc Coating: 130-225 g/m2. Protective hot-dip coating ensures durability based on wire diameter.

• Coil Inner Diameter: 340-500 mm

• Coil Outer Diameter: 850-900 mm

• Coil Weight: 550-650 kg

• Tensile Strength: 340-500 N/mm2

• Elongation: 10% standard, 0.87 mm wire has minimum elongation at break of 7.5%.

• Wrapping Test: Wire passes mandrel test with diameter 4 x nominal wire diameter; no break occurs after one complete turn.

• Electrical Resistivity: Max 138 Ohm.mm2/km
  

• Surface Finish: Hot-dip galvanizing process ensures bright, even coating.

• Applications: Binding, fencing, reinforcement, mesh, wire fabrication, cable support, and other industrial needs.

Hot-Dipped Galvanized (HDG) Wire Export to Egypt

Primarily used in steel nail manufacturing, industrial wire drawing, and other mechanical descaling processes

• Wire Diameter: 2.28 mm, 2.83 mm, 3.02 mm, 3.30 mm, 3.68 mm

• Diameter Tolerances: ±0.04 mm

• Tensile Strength: 750-1150 N/mm2

• Zinc Coating: Minimum 305 g/m2

• Surface Finish Requirements: Wire surface exhibits a smooth, uniform finish free from residues, irregularities, lumps, cracks, bends, or uneven zinc deposition.

• Coating must be continuous and adherent with no bare spots, tears, or sharp protrusions. Zinc remains adherent after nail modifications.

• Complies with ISO 1461 standards.

• Coil Packaging Requirements: Each coil is secured with 4 metal straps and includes 4 hooks for safe lifting and handling.

• Coil Wrapping: Coils are wrapped with water-resistant kraft paper or plastic film to protect against moisture and environmental damage during transport.

• Applications: Construction, fencing, wire mesh, nail manufacturing, and other industrial uses where galvanized corrosion resistance is required.

Hot-Dipped Fully Galvanized Stay Wire - 7 x 4mm x 12mm Technical Specifications

Hot-Dipped Fully Galvanized Stay Wire 7 x 4mm x 12mm Rolls for Agriculture and Construction Use

• Roll Length and Tolerance: Supplied in 610-meter rolls, with 0% to +5% tolerance.

• Lay Type: Wire lay is Right Hand (RH) for structural stability.

• Wire Construction: 12 mm wire made of 7 strands, 4 mm each.

• Wire Weight: Each strand weighs 0.7095 kg/m, suitable for support.

• Minimum Breaking Force: Minimum breaking force is 96.76 kN, ensuring durability.

• Tensile Strength: Wire tensile strength is 1100 MPa for long-term performance.

• Surface Finish: Hot-Dipped Fully Galvanized for corrosion resistance and outdoor use.

• Delivery Requirements: Delivered in 610 m rolls on wooden bobbins, compliant.

• Wire Diameter: 12 mm diameter provides strength and flexibility for applications.

• Applications: Used in agriculture, fencing, trellises, construction, and industrial structures.

• Packaging & Handling: Rolls wound on bobbins with labels for safe transport.