What are the Factors Affecting Industrial Aluminum Profiles?

We know that there are a lot of Aluminum Profiles in the market, whether they are brands or types, and the quality is different. There are good and bad. Why do industrial aluminum profiles have different qualities? What are the influencing factors? As an Aluminum Rack System Factory, share with you.

1. Aluminum alloy melting furnace

Smelting furnaces are also crucial. Most are square furnaces (rectangular furnaces). The main one is the round furnace. Some round furnaces can tilt aluminum. The tonnage of aluminum melting furnace is 1 ton, 2 ton, 5 ton, 10 ton, 25 ton, 50 ton. The main thing is to add a fixed furnace and a fixed furnace under the aluminum melting furnace to make the alloy. It can remove slag, degas in the furnace, then stand still, and then forge aluminum rods for kneading and kneading. Generally, no matter what fuel is burning in the furnace, there should be a flue gas. Most of the waste gas and slag produced during the fuel incineration can be discharged from the flue gas. If all the exhaust gas and slag are melted in the aluminum water without the chimney, the aluminum rod for kneading will be cast. The existence of severe slag inclusion bubbles in the aluminum rod is one of the reasons for the low quality of aluminum raw materials and the low price of aluminum.

Aluminum Profiles

2. Alloying elements

The alloy with qualified formula has the ability to guarantee the quality, otherwise the quality will not go away if it is processed in the future. To reduce costs for some manufacturers, the amount of magnesium was reduced to the lower levels promised. Because of this, the mechanical strength of aluminum profiles is very low, it can be as low as two hands to bend it is very simple and tortuous, commonly known as as soft as noodles. This is one of the reasons why aluminum prices can be thousands of dollars cheaper.

Standard aluminum manufacturers have internal standards in the manufacture of alloy parts, that is, on the scale of various components, each factory has its own smaller scale, and the demand for aluminum, magnesium, and silicon is very high. Strictly speaking, each factory has its own data and keeps it confidential.

3. Kneading of profiles

There are many types of profiling kneaders in China and their levels are uneven, which is also a comparison of the world. The factory has its own simple kneading machines, some of which are converted from extrusion plastic machines, a few are made in China, followed by Japan, the United States and Germany, with water pressure and oil pressure. There are hundreds of kneaders in China. Kneaders from Japan, the United States and Germany are generally considered better. The number of good and bad kneaders, the same cast rod, and the amount of extruded material has never been the same.

The above three points are factors that affect the quality of industrial aluminum profiles, so we will see many industrial aluminum profiles of different quality in the market. Our company also has Aluminum Pipe on sale, welcome to consult.