What Should I do if the Slide for Metal Drawer is Stuck?

As a Drawer Fittings Manufacturer, share with you. Many cabinet designs are equipped with slide rails, and slide rails are a more important part of the drawer operation. Sometimes the slide rails of the cabinet drawer may get stuck. What should I do at this time?

It is fixed on the cabinet body of the furniture, and is a hardware connecting part for the entry and exit of the furniture drawer or cabinet board. The slide rail is suitable for the drawer connection of wooden and steel drawers and other furniture such as cabinets, furniture, document cabinets, bathroom cabinets.

Ball Bearing Slide

How to disassemble Slide for Metal Drawer?

First of all, you need to determine the kind of slide rail in your home, such as three-section track and two-section track.

Then pull out the cabinet easily, but you must keep it in a stable state when you pull it out so that you will not harm the cabinet and the track when you pull it out.

Take a look at whether there are sharp buttons on both sides of the cabinet. If you see it, try to push it down with your hand. If you can press it, you will hear a click. At this time, take out the cabinet.

But don't use too much force when pressing, if you don't press it, something is stuck, you need to check.

After pressing, gently remove it while keeping it flat, so that it will not cause too much damage to the track.

After drawing it out again, check whether the rail of the drawer is due to deformation or other conditions. If deformation is encountered, the position of the deformation is usually adjusted and fixed.

Then put it into it according to the original way, which can easily complete the disassembly of the drawer slide rail and the big problems of installation.

Now you should know how to solve the problem that the slide rail of the cabinet drawer is stuck, I hope it is useful to you.

Our company also has Ball Bearing Slide for sale, please contact us.