How Much do you Know About Rail Joint Bar?

As a Din Standard Rail Joint Bar Supplier, share with you.

Although there are many types of railway turnouts, different types of turnouts can be laid according to different environments and different needs. However, no matter what type of railway turnout is, in order to ensure the stability and safety of the railway turnout, it is necessary to ensure that each railway fitting is good and the foundation under the rail is solid. The fishtail board manufacturers summarized the technical requirements for the foundations under the rails: There are two types of wooden sleepers and prestressed concrete sleepers for the foundations in the turnout area. The cross section of the wooden fork pillow is 260mm * 160mm, and the length is 2.6-4.8m.

African Standard Rail Joint Bar

The Rail Joint Bar is obtained by impregnating a substrate containing a solution containing an alkoxysilane derivative or a condensate thereof with a thermosetting resin containing no halogen-based flame retardant and heating and drying to obtain a prepreg. Several pieces of this prepreg are stacked, and copper foils are stacked on one or both sides of the prepreg as required, and heated and pressurized and laminated. In this dry, cool and large temperature difference season, in order to make the track clamps, insulation clamps and other products perform better, we need to carry out a comprehensive inspection. The inspection at this time is not a simple surface inspection, but requires We conduct a comprehensive inspection of the connection between its internal and external components

Fishplates are no strangers to the construction of rails. They are a commonly used connection tool. At the same time, fishplates have other names. They can also be called fishplates, fishplates, rail fishplates, etc. It is an important fastener in rail connection. Of course, many people may not be able to distinguish between the fish plate and the fish plate. The common point of the fish plate and the fish plate is the same, that is, it acts on the connection of the rails. The function is the same, but there are some differences in the names. Fish plates are used on rails, so their differences are related to the rail model.

The ground is not less than 150mm, the ballast should be buried 2/3 of the sleepers, the sleepers must be exposed 1/3, the track bed should be cleaned frequently, and there should be no debris, no floating coal, and no standing water. The ballast of the general transportation line should not exceed the surface , Not less than 1/3 of the pillow surface. The material and granularity of the track ballast should meet the requirements of the standard, and it must be tamped and solid, without the phenomenon of empty plates and hanging plates. There are many standards for the use of track installation. Railway turnout is an important device to realize the conversion of stock roads, and it exists widely on railway lines. At present, electro-hydraulic controlled automatic turnouts have replaced backward artificial turnout basins. Due to the large number of joints in the turnout area and complex curves, they are often the high-incidence areas of driving safety accidents.

Our company also has the African Standard Rail Joint Bar on sale, welcome to consult.