What is the Method to Improve the Welding Efficiency of Automatic Automatic Welded Wire Mesh Fence Machine?

As an Automatic Welded Wire Mesh Fence Machine Manufacturer, share with you. Regarding the use of Automatic Welded Wire Mesh Fence Machine, it is a trick to improve the power of automatic spot welding machine. The first is to train employees to progress through the following three aspects. They are footwork, method, and eyesight.

Automatic Welded Wire Mesh Fence Machine

First, foot method policy: foot pedal can be skillful to control the welding head at various speeds to move up, down, stop operation, afterburning operation. Drilling methods:

1. Put the wire directly under the welding head of the automatic spot welding machine, control the welding head to move from top to bottom, and then stop, just press the line without triggering, the speed is from the slowest to the fastest drill.

2. Press and hold the above method to practice, the welding head presses the line and then stops, then force the welding head to trigger ignition. Skillful in the future will repeat the practice of pressing the line and afterburning welding to reach very circulation.

3. Use a crimped wire tip, and use the welding head to press the crimped wire tip against the pad.

Second, the approach: the hands can move the goods very dexterously. Drilling methods:

1. Keep your elbows on the table, keep your palms raised naturally, through the cooperation of the two index fingers, the twisting of the fingers, the palm swing, quickly move the goods under the welding head and practice together to quickly remove the goods. It can move quickly when it is not close to the welding head on the channel, and slows down when reaching the bottom of the welding head, and cooperates to align the azimuth.

2. If there is an auxiliary stick or clip in the right hand, move the auxiliary stick through the thumb and index finger, and between the middle finger and ring finger when moving the goods. The time used, through the middle finger's jump position, is quickly changed to pass through the thumb and index finger, index finger and middle finger between.

3. Depending on the size of the product, you can put your palm on the channel according to your own comfort level, and you can quickly move the product through the operation of the index finger.

Third, the vision policy: accurately determine whether the line is pressed correctly on the pad, and accurately remember the welding head drop point. Drilling methods:

1. Investigate the orientation of the lowest landing point of the solder joint on the screen, remember the orientation, move the solder joint of the commodity to the orientation, drill hands to operate on the channel, look at the screen with both eyes while moving, the time when holding the commodity in hand Look at the commodity channel.

2. Understand the visual difference between the front and back of the welding head of the automatic spot welding machine. The line should pass through the base of the bottom of the welding head. What you see on the screen seems to be that the line passes behind the welding head.

3. Gradually put your head close to the welding head to investigate, pass the wire pair through the base of the welding head, do not move after the foot is pressed, look at the display, remember the direction of the line on the screen from the base of the welding head, put This kind of scene is remembered in the mind, and will be aligned according to this situation in the future.

Our company also has Fence Panel Welding Machine on sale, please contact us.