What's Wrong with the car if the Connector is Used Incorrectly?

A few days ago, in response to the troubles and inconveniences caused by the failure of automotive electronic circuits. According to the needs of the public, the Car Phone FAKRA Connector Factory answers the professional problems of automotive electronic circuit failure caused by wet connectors.

FAKRA Connector

Many private cars now like to install some electronic settings on the car, such as car anti-theft devices, audio, etc. If the FAKRA Connector construction technology is unprofessional, it will cause the wiring to be wrong, or the original line will be overloaded, resulting in a short circuit. Cause electronic system failure, and even cause fire.

Failure caused by improper human operation:

For electronic components in the car, it is best to read the instructions before use. Experts say that some electronic failures are caused by the owner's lack of understanding of how to use and set up, and incorrect operation. In addition, be careful when operating the control switch or panel and do not use excessive force.

Problems caused by improper car washing:

Some car owners like to flush the engine with water, which is very dangerous. Because some parts of the engine are very afraid of water, it is easy to cause the electrical sensors and trip computer to malfunction when flushed with water. A similar situation is that during a summer rainstorm, when a vehicle is passing through water, if the water is accidentally immersed, the engine or electronic components will be soaked in water, which will cause a short circuit in the electronic component circuits, and the automotive electronic system will have problems.

Failure due to lack of maintenance:

Automobile electronics are structurally divided into four parts: sensors, control units, actuators, and connecting wires / data lines. Automobile electronics failures are also closely related to the normal operation of these four aspects. These components in the automotive electronic structure are very precise, and they also have high requirements for the use environment. At present, the lack of maintenance and cleaning of the electronic components commonly existing by vehicle owners has become an important cause of failure.

Cars that use electronic meters to connect wires require many connectors to connect the wiring harness to the dashboard. However, once these connectors are wet or eroded by water, the connecting wires are often oxidized, which leads to poor contact. The inspection can be carried out by eye or by hand. The connector device must be complete and intact, and the plug and socket should be reliable and non-corrosive. Touch the connector by hand during the operation of the instrument circuit. There should be no obvious temperature feeling. If the temperature is too high, it indicates that the connector is in poor contact, and the cause should be immediately investigated and eliminated.

Our company also has FAKRA Female Adapter on sale, welcome to consult.