How to Store Bearings Scientifically?

Bearings are high-precision objects, and the transportation path is far away. The storage requirements for imported bearings are very strict, regardless of temperature, moderation, and packaging. So what is the scientific way to store bearings? The Wheel Bearing Manufacturer will be announced for us below.

Wheel Bearing

Scientifically store bearings, as long as the relative humidity of the storage room does not exceed 60%, and the temperature does not change much, the bearings can be stored in the original packaging for a long time. After long-term storage of bearings with sealing rings or dust covers, the characteristics of the grease in the bearings may be affected. Bearings taken out of the original packaging should be properly protected to prevent corrosion and contamination. The correct storage method for large rolling bearings is to place the bearings in a horizontal position, and the entire side of the bearing ring should be supported. If the bearing is placed in a vertical position, due to the relatively small thickness of the bearing ring, the weight of the bearing ring and rolling elements may cause permanent deformation of the bearing.

The scientific storage of bearings is very important. If improper storage leads to bearing rust or bearing corrosion, it is not good. Even if there is no surface damage, then it is possible that such and other failures may occur during the operation of imported bearings, so it must be Bearing storage should be taken seriously.

In order to ensure the long-term use of the bearing, and in order to maintain its proper performance, regular maintenance is necessary. The first thing to do is regular inspections. Regular inspections can help to find out the existing faults in time, and early detection and repairs can effectively prevent the occurrence of accidents, and can also help improve productivity and economic efficiency.

When storing it, the city should be careful not to damage the anti-rust coating that was originally provided when it was shipped from the factory. This can help to save effectively, and it is best not to get too wet and temperature if it is stored in a place Generally, it should be kept at about 20 degrees, and it is necessary to avoid direct sunlight as much as possible. In addition, some objects that are too low in temperature should not be touched as well.

Our company is also selling Wheel Bearing, please contact us.