Do regular inspection and maintenance work for Bucket Teeth

The Bucket Teeth is an important consumable part of the excavator. Similar to a human tooth, it is a combination of a toothed tooth and a tooth tip, which are connected by a pin. Since the tooth wear failure portion is the tooth tip, it is only necessary to change the tip.

Bucket Teeth

With the realization of mechanical equipment, people have gradually adapted to the mechanical operation, but in the process of using mechanical equipment, we often encounter many small problems, sometimes mechanical failure suddenly occurs during work, which is very frustrating And helpless things, then if you reduce or avoid these failures? Now let us briefly introduce the teeth of the rotary excavator.

1) Leak detection: Check the leakage of inorganic oil, water, and fuel in all parts of the machine.

2) Check the elastic joints and accessories for scratches, breaks or deformations.

3) Check the fixing and connection of the hydraulic unit.

4) Check the appearance of the mechanical parts.

5) Check the operation of the operating device, control lights, and various indicators.

6) Check the operation of the tooth engine of the rotary excavator: whether there is a problem with the exhaust color, whether there is abnormal sound, and determine the position of the abnormal sound.

These are effective measures to avoid mechanical failure during construction. If you have a similar bad experience, try the methods in this article. I believe you will get something!

Classification according to the environment in which the excavator's teeth are used. Excavator teeth can be divided into rock teeth (for iron ore, stone mines, etc.), earth teeth (for excavation of soil, sand, etc.), tapered teeth (for coal mines). According to the tooth holder: The bucket teeth of the excavator can be divided into vertical pin teeth (mainly Hitachi excavators), cross pin teeth (Komatsu excavator, Carter excavator, Daewoo excavator, Kobelco excavator, etc.) , Rotary bucket teeth (V series bucket teeth).

As an Excavator Spare Parts Manufacturer, introduce the process of the tooth: sand casting, forging casting, precision casting.

Sand casting: the lowest cost and the same level of workmanship and tooth quality is not as good as precision casting and forging casting.

Forging and casting: the highest cost and the best level of workmanship and tooth quality.

Precision casting: The cost is moderate but the requirements for raw materials are very strict and the process level is relatively high. Some of the precision cast teeth have better wear resistance and quality than forged casting teeth due to the ingredients. At present, precision casting tooth is the mainstream manufacturing process of the tooth on the market. Our company also has Excavator Bucket Teeth on sale, welcome to come to consult.