Reasonable use of excavator Bucket Teeth

　　As people's use of excavators continues to increase, more and more projects are gradually adapting to the existence of such equipment. However, with the use of excavators, the loss of the excavator's teeth is constantly increasing. So what should we do when we use the excavator to use Bucket Teeth more effectively?

Bucket Teeth

　　The importance of Excavator Bucket Teeth is self-evident, so you should pay more attention when using it. Be sure to take the correct measures so that the use of the excavator will be normal. So, how to use the excavator's teeth is correct? Here is a brief introduction.

　　The correct choice: the use of the excavator's teeth should first be the right choice, and the determination of the material needs to be carried out according to the environment. Only in this way can the better selection be ensured, and the correctly selected teeth are in use. It is also possible to perform at its best.

　　Note of angle: The excavator driver should pay attention to the angle operation during excavation. When mastering the excavation as much as possible, the bucket is perpendicular to the working surface when digging, or the camber angle is not more than 120 degrees to avoid breaking due to excessive dip angle. Tooth. Also, be careful not to swing the excavating arm to the left or right with large resistance. This will cause the tooth and the tooth to be broken due to excessive force on the left and right. Because the mechanical design principle of most types of teeth does not consider the left and right forces. design.

　　Timely replacement: The wear of the toothed seat is also very important for the service life of the excavator's tooth. The toothed seat wears 10% - 15%, it is recommended to replace the toothed seat, because the excessively worn toothed seat and bucket There is a large gap between the teeth so that the cooperation of the tooth and the tooth holder and the force point are changed, and the tooth is broken due to the change of the force point.

　　Excavator tooth maintenance tips

　　The wear of the teeth of the excavator will become more and more serious. After a certain period of time, it will often be damaged. So what should we do with the teeth? Let the Bucket Teeth manufacturer teach you below.

　　First, organize the protection. After using this thing in peacetime, let us not rush to preserve them, and do not blindly store them. The best way is to protect them. It is worth noting that when sorting out, it is necessary to remove pollutants, dust, impurities, and to restore the cleanliness of the corners of the thing so that they will have very good working conditions in the next work. .

　　Second, repair protection. After the buckets are used in peacetime, they should also pay attention to the inspection. They are inevitably worn out or damaged when they touch with various soils. For this reason, we must find the problem in time, so that we can repair it very well. They are then guaranteed to end the protection.

　　Therefore, when we use the bucket, we can protect them according to the above tips. This is the basic trick to protect them. It is a good condition to ensure the long-term use of this thing. Often the damage of the hydraulic grab bucket teeth of the slot machine starts from some details. The dike of a thousand miles is destroyed by the ant hole. We can only use it better if we maintain the maintenance of the tooth.