What is a DIN connector?

The DIN connector is an electronic cable that has been widely accepted as the standard for various applications for many years. It consists of a metal protective skirt containing straight round pins. The skirt is strategically keyed to allow the plug to be inserted properly and prevent damage to the pins. However, the keying in all original DIN connectors is uniform and can accidentally be connected to the wrong mating, which can cause damage. The introduction of Mini-DIN prevents possible misconnections. As a DIN Connector Factory, share with you.

There are seven common modes, with three to eight pins with different five-pin connectors: 180 ° and 240 ° or 270 °. Sometimes a 180 ° five-pin connector is used to connect the stereo recorder to the amplifier, using four pins to connect, and one pin to ground. Sometimes called DIN wire, DIN wire or DIN cable.

The 3/180 ° and 5/180 ° connectors were originally designed to connect the system with four pins and ground one to connect analog audio equipment such as stereo audio recorders to an amplifier or preamplifier. There is one connection at each end of the cable, and each pin matches the other.

Waterproof DIN Female RF Connector

5/180 ° connectors are commonly used in various applications, such as:

1.Control interface for antenna line equipment

2.Serial port in original Apple IIc computer

3.Electronic instrument MIDI interface

4.DIN synchronization interface for electronic musical instruments

5.Connect the two controllers of the radio model aircraft

6.Audio equipment (such as the original HME wireless communicator) and inbound / outbound audio for through train restaurants

7.Keyboard and mouse connectors for original IBM PC and IBM personal computers

The IN connector contains several types of cables that plug into the interface to connect the device. Its architecture consists of multiple pins in a protective circular sheath. Generally, a full-size DIN connector has 3 to 14 pins with a diameter of 13.2 mm.

DIN connectors are standardized by the (DIN) organization as German national standards. The DIN standard applies to various DIN connectors. The term DIN connector does not refer to a specific cable, but refers to all DIN-compliant connectors.

In terms of electronics on a computer, the DIN connector is called a circular connector, which is DIN standardized for digital interfaces such as MIDI, IBM AT computer keyboard or mouse, and analog video architecture. The original DIN standard for older connectors is no longer printed and has been replaced by the corresponding international standard IEC 60130-9.

Our company also has Waterproof DIN Female RF Connector on sale, welcome to consult.