Fast cure Resin Capsule

Resin Capsule

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

Curing in a short time and perfectly matched with conical adhesive anchor

Material：polyurethane acrylic + quartz sand            

Advantages:

Fast cure, high construction efficiency

Suitable for various anchorage fasteners, small spacing/edge distance

Excellent property of load-bearing, anti-seismic and anti-welding

Wide working temperature range, even -10℃

No phenylethene, non-toxic

Fast cure Resin Capsule Applications： 

Curtain wall

Steelwork constructions

Equipment fixing

Pipeline, bracket

Baffle plate, hanging plate, acoustical plate

Installation:

Drill the hole to proper depth and diameter per specifications using ordinary impact drill; the verticality, hole diameter of embedded plate, maximum spacings, etc. are in accordance with JGJ/145-2013.

Blow the hole clean using compressed air.

Put the resin capsule into the drilled hole.

Before installation, firstly break the glass tube with the anchor, then use the setting tool to drive the anchor into the drilled hole until the mark of the anchor is tight against the surface of concrete base material.

After the cure, place the fixture.