chemical anchor system

Conical Specified Adhesive Anchor

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

High anchoring force, the best performance in cracked concrete

● Material: alloy steel grade 5.8, 6.8, 8.8, 10.9, 12.9; stainless steel 50 70 80 

● Designed high strength chemical anchor, suitable for all kinds of concrete base material, even cracked concrete

● The main components of the chemical cartridge are modified epoxy resin, grade A adhesive; high/low temperature resistance and aging-resistance 

● Injection embeddment, without disadvantage of uneven mixing

● We also provide specialized underwater adhesive for damp and water-filled holes for effective anchorage

● We recommend our excellent NJMKT Anchorage Adhesive (MT-500 cartridge or barrel) for NJMKT adhesive anchors

Characteristics

● Excellent comprehensive performance, safe and reliable, construction tolerance is higher than conventional chemical anchor, non-toxic environmental protection, aging-resistance up to 50 years and high/low temperature resistance 

● Comparing with mechanical anchors, the same tensile strength characteristics but low price advantage for your choice

Adhesive Anchor Factory:Nanjing Mankate Science & Technology Co., Ltd.

Installation flow chart

1.Measure the length of bolt

2.Measure the length of drill bit

3.Drill the hole

4.Clean the hole using brush

5.Blow the hole using compressed air

6.Attach the mixer nozzle to the cartridge and place it into the applicator gun

7.Extrude the first three times of adhesive injection to waste

8.Until an even color of adhesive is achieved in the mixer, inject adhesive until the hole is about 2/3 full

9.Embed the anchor to the bottom of drilled hole anti-clockwise slowly

10.Installation finish

Established in 2004, our chemical anchor system, Dismountable Anchor and other chemical and mechanical anchor products got ISO, CE certificates. Welcome choose us.