How to Maintain Coffee Capsule Packaging Machine?

As a Coffee Capsule Product Line Factory, share with you. With the continuous development of industrialization, the processes and methods of product production has undergone tremendous changes. Product packaging is an important link in the production process, and its degree of mechanization, automation and intelligence is also constantly improving. On the basis of meeting the basic definition, the fully automatic coffee capsule packaging machine also keeps up with the market demand, continuously carries out technical research and development and product updates, and plays a greater role in product packaging.

Maintenance of Coffee Capsule Packaging Machine is essential for long-term use.

Nespresso Filling Machine

Machine lubrication

1. The box of the machine is equipped with an oil gauge. It should be refueled once before driving. It can be added in the middle according to the temperature rise and operating conditions of each bearing.

2. The worm gear box must store engine oil for a long time, and its oil level is that the worm gear completely invades the oil. If it is used frequently, it must be replaced with new oil every three months. There is an oil plug at the bottom of the cymbal for oil discharge.

3. When refueling the machine, do not allow the oil to spill out of the cup, let alone flow around the machine and to the ground. Because oil is easy to contaminate materials and affect product quality.

Care instructions

1. Regularly inspect the parts and perform it once a month to check whether the moving parts such as the worm gear, worm, lubricating block bolts, bearings and other moving parts are flexible and worn. If defects are found, they should be repaired in time and must not be used barely.

2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other corrosive gases.

3. After the machine is used or stopped, the rotating drum should be taken out for cleaning and brushing the remaining powder in the bucket, and then installed properly to prepare for the next use.

4. If the machine is not used for a long period of time, the entire body of the machine must be wiped and cleaned. The smooth surface of the machine should be coated with anti-rust oil and covered with a cloth awning.

Precautions

1. Before starting each time, check whether there is any abnormality around the machine;

2. During the operation of the machine, it is strictly forbidden for the body, hands and head to approach or touch the moving parts!

3. During the operation of the machine, it is strictly forbidden to put hands and tools into the knife holder!

4. When the machine is working normally, it is strictly forbidden to frequently switch operation buttons, and it is strictly forbidden to change the parameter setting value frequently;

5. It is strictly forbidden to run at super high speed for a long time;

6. It is forbidden for two or more colleagues to operate the various switch buttons and mechanisms of the machine; the power should be turned off during maintenance and repair; when multiple people are debugging and repairing the machine at the same time, they should pay attention to each other's communication and indicate to prevent accidents due to uncooperation.

Our company also has Nespresso Filling Machine on sale, welcome to consult.