Do you know Glue Dispensing Machine?

Glue Dispensing Machine, also known as glue applicator, glue dispenser, glue dispenser, glue dispenser, etc., specifically controls the fluid. The automatic machine that drips and applies fluid to the product surface or inside the product can realize three-dimensional and four-dimensional path dispensing, precise positioning, precise control of glue, no drawing, no leaking, no dripping. The dispensing machine is mainly used for the precise point, injection, coating and dripping of glue, paint and other liquids in the product process to the precise position of each product. It can be used to achieve dots, lines, circles or arcs.

Classification:

There are many names for glue control equipment, such as glue dispenser, glue dispenser, glue applicator, glue dispenser and so on.

normal type

1. Controller type dispenser

Including automatic dispenser, quantitative dispenser, semi-automatic dispenser, digital dispenser, precision dispenser and so on.

2.Desktop Dispenser

Including desktop dispenser, desktop three-axis dispenser, desktop four-axis dispenser, or desktop automatic dispenser, 3-axis assembly line dispenser, multi-head dispenser, multi-outlet dispenser, circle Dispenser, rotary dispenser, speaker dispenser, mobile phone button dispenser, cabinet dispenser, etc.

3.Semi-automatic dispensing machine

Including microcomputer precision dispensing machine, LED digital display dispensing machine, automatic suction suction dispensing machine, pull-out cycle dispensing machine.

Features:

Can replace manual operations to achieve mechanized production; single machine can be operated, simple, convenient, high-speed and accurate; SD card storage mode, convenient for data management and file transfer between machines; can be equipped with a two-component pumping system to form a two-liquid automatic Dispensing machine; can be equipped with dispensing controllers and valves to form floor dispensing equipment; can be equipped with a screw lock mechanism, configured as an automatic locking screw machine; can be upgraded to an online robot as needed Automatic assembly; strong carrying capacity and large processing space.

Automatic Glue Dispensing Machine

As a Desktop Glue Dispenser Wholesale, share some common knowledge about selection

If there are additives in the liquid or vacuum defoaming is required, the bucket must be equipped with an electric stirrer.

When the liquid affects the operability due to temperature changes, the tank or pipeline needs to be equipped with a temperature control system.

If the liquid contains quartz powder or other abrasive powder additives, it is recommended to use a piston volumetric metering product.

If there are additives in the liquid and there is a serious precipitation phenomenon, the gear measuring type cannot be used.

The two-liquid mixing method should be based on the ratio of the proportion and the difference in viscosity to determine whether to use static or dynamic mixing.

When the viscosity difference between A and B liquids is too large or the ratio is above 5: 1, a dynamic mixer is required.

For use with automated equipment, please install high and low level detectors.

If the liquid will crystallize, in addition to the plastic storage barrel, the supply pipeline must also be equipped with temperature control.

When the amount of glue used in daily work is large, a feed pump can be used instead of the storage bucket.

If air bubbles cannot be included during the product encapsulation process, a vacuum infusion system is required

Our company also has Automatic Glue Dispensing Machine on sale, welcome to consult.