Use Of V-type Mixer

V-type mixer has a reasonable structure, convenient operation, and easy cleaning, so it has been widely used. Today, the supplier of Powder Mixer Machine will share with you the precautions for the use and maintenance of V type mixer, please read on!

1. Installation: lay the machine flat, install the feet, flatten the machine, so that the machine can run freely.

2. Before use, you must refuel in the oil area, and then perform no-load operation to check whether the fasteners are loose, whether the power is normal, and whether the machine is operating normally. If there are abnormalities, you should refurbish and debug.

3. Move the feeding port to the top, open the feeding cover, the feeding amount should not exceed the specified volume, and then close the feeding cover, start the operation, if the way is abnormal, you must stop inspection.

4. After work or replacement, the inside and outside of the hopper must be cleaned.

In addition, due to its excellent performance and relatively complex system parameters, if non-professionals do not understand it, it is easy to have some failure problems in early use, such as the asymmetry phenomenon when using V-type Mixer, then V in the mixing work what is the reason for the asymmetry of the type mixer? So, what should we pay attention to when using V-type mixer?

V-type Mixer

In the case of conveying materials, open the feed port of the mixer, and close the discharge port according to technical control requirements, and put a certain amount of material into the V-shaped hopper. At the end of the feed, in order to prevent the material from flowing out during mixing, the feed opening must be closed and locked.

The next step is the machine operating time, turn on the power button, rotate the stop button to the left, start the mixer reverse button, and adjust the motor speed within the speed range specified by the technical rules to mix the goods at 600 R / min. When the mixed gas reaches the technical rules, after the speed button of the conditioning motor is stopped, the discharge port of the mixer should face the ground, the speed button of the adjustment motor should be adjusted to 0 position v agitator, and the stop button should be rotated to the right to block the power supply.

The V-type mixer is equipped with a motor and a reducer at one end. The power of the motor is transmitted to the reducer through a belt, and then the reducer is transmitted to the V bucket through a coupling. V-shaped buckets operate one by one, and the materials in the sports bucket are mixed, mixed downward, left, and right in the bucket.

The V-type mixer organizes the moving cylinder by rotating at a reduced speed, and uses the asymmetry formed by the unequal length of the two cylinders of the mixer to perform mixing. When the mixer moves, due to the difference in potential energy, the material changes from differentiation to combination. Due to the difference in potential energy, a lateral force is generated to promote the horizontal transfer of the material. When materials are combined to differentiate, due to different material levels, lateral forces are generated to promote the horizontal transfer of materials.

The above is how the Double Cone Mixing Machine supplier introduces the use of the v-type mixer and the problems that will arise when using it. I hope to help everyone.