What are the requirements for the use of Asphalt Mixing Plant?

Asphalt Mixing Plant refers to a complete set of equipment for mass production of asphalt concrete. It is currently an indispensable equipment for highways, grade highways, municipal roads, airports and ports in China. For this equipment, it needs to reach a lot when it is used. In terms of requirements, which specific requirements must be met, LB Asphalt Mixing Plant China will briefly introduce them.

The asphalt mixing station must first have good stability when used, because if there is no good stability, the asphalt mixing station cannot meet the requirements of the project in terms of requirements or mass production. For road construction As for the asphalt concrete measurement requirements are relatively strict and precise, only qualified asphalt concrete can make the road construction quality meet the actual requirements, so the stability of the asphalt mixing station is very important. 

Asphalt Mixing Plant

Secondly, when the asphalt mixing station uses its own requirements and has all the required functions, the equipment should be as simple as possible, and the overall operation needs to be reduced as much as possible, so that a lot of manpower investment can be saved during operation. At the same time, the corresponding cost is saved. Although it is simple, it does not mean that the technological content of the asphalt mixing station needs to be reduced.

The above is the requirement that the asphalt mixing station needs to meet when using it. Because each kind of equipment needs to work as expected, it needs corresponding conditions for the equipment itself. It must be a qualified and convenient equipment to ensure it. Efficiency and quality of work.

With the development of society and the improvement of people's living standards, people pay more and more attention to urban construction. The development of highways and construction is the key to urban construction. Therefore, the use of asphalt is increasing, and the application rate of asphalt mixing stations is natural. It is also growing rapidly.

Asphalt Mixing Equipment

During the use of the asphalt mixing station, more or less failures will be encountered. The more common ones are uneven wear of the supporting wheels and wheel rails, and sometimes there are some abnormal noises and hemming. The main reason for this situation is that after the asphalt mixing station has been working for a period of time, the internal drying cylinder will be exposed to high temperature, and then friction will occur with the supporting rollers and wheel rails.

Environmentally friendly asphalt mixing station

The above situation will be accompanied by a severe tremor, because the asphalt mixing station will directly cause the gap between the wheel rail and the supporting roller to be improperly adjusted due to the drying material, or the position of the two will be skewed. When encountering such a situation, the user should add grease to the surface contact position of the supporting wheel and wheel rail after daily operation.

Our company also has LB Asphalt Mixing Plant on sale, welcome to consult.