Usually, the Artificial Grass Yarn is damaged after the construction through the relevant refurbishment process. The natural turf is actually the same, and measures should be taken after degradation or damage. In fact, repairing artificial turf is no easier than making new artificial turf fields, but it is even more difficult. Next, the Landscape Artificial Grass Factory will give you a detailed explanation.

1. The renovation of the artificial turf site requires the removal of the old artificial turf and the replacement of the new artificial turf. One of the steps is to dismantle the Essential Artificial Grass, which is a key link. The first thing to pay attention to when dismantling artificial turf is to not destroy (eliminate) the original artificial turf foundation. The artificial turf foundation is generally cement, asphalt, or other lime soil cushion. During the installation, Artificial Grass Yarn is bonded by adhesive. On the ground or seam belts and non-woven fabrics, use the tools to remove the Artificial Grass Yarn and the bonding layer during the process of removing the artificial turf. Do not ruin the artificial turf foundation.

Essential Artificial Grass

2. The other waste materials that have been dismantled are in tons. Therefore, in the process of quotation, full consideration should be given. When many novices go to the venue, the Essential Artificial Grass of the site is close to being bald, thinking that it needs to be cleaned. There will be less garbage, which is not the case. Because the amount of granules and quartz sand filled in the new Artificial Grass Yarn site is basically the same, a standard football field is taken as an example. The quartz sand filled is about 200 tons, so this is a Very large garbage disposal work, so it must be fully considered when making budgets.

3. Artificial Grass Yarn carries and cleans old quartz sand and rubber granules. These materials that have been scrapped are not usable. After many years of use, these old materials have long lost their inherent properties. There are a lot of dust and other dirty things, and it has no safety performance.

4. Before paving the new Essential Artificial Grass, be sure to clean the site first. If it is conditional, rinse it off with water, clean up the dust on the site, and then start to lay the artificial grass.