How does cooling tower work?

We are one of cooling tower fill manufacturers, here I will tell you the work principle of cooling tower.

A cooling tower is a heat rejection device which rejects waste heat to theatmospherethrough the cooling of a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of closed circuit dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature.

Common applications include cooling the circulating water used in oil refineries, petrochemical and other chemical plants,thermal power stations andHVAC systems for cooling buildings. The classification is based on the type of air induction into the tower: the main types of cooling towers arenatural draft and induced draftcooling towers.

Cooling towers vary in size from small roof-top units to very large hyperboloid structures(as in the adjacent image) that can be up to 200 metres (660 ft) tall and 100 metres (330 ft) in diameter, or rectangular structures that can be over 40 metres (130 ft) tall and 80 metres (260 ft) long. The hyperboloid cooling towers are often associated with nuclear power plants,although they are also used in some coal-fired plants and to some extent in some large chemical and other industrial plants. Although these large towers are very prominent, the vast majority of cooling towers are much smaller, including many units installed on or near buildings to discharge heat from air conditioning.