Components and surface treatment of stadium fence

The stadium fence is a protection product mainly designed for school stadiums. It is used to prevent balls from flying out of the field to hurt people. It is a flexible fence net that can be adjusted at any time on site. Shape and size, the trial site is generally 3-6 meters. What are the parts of the sports field mesh panel fencing?

First, surrounding frame structure:

The surrounding frame is mainly composed of columns, beams and frames. The material of the raw material tube can be divided into three types: low carbon steel, stainless steel and aluminum alloy. Common specifications are: low-carbon steel with a diameter of 76mm and a wall thickness of 2.5mm, which is hot-dip galvanized, and the height is generally 4-6 meters. The beam uses a hot-dip galvanized pipe with a diameter of 60mm and a wall thickness of 2.0mm, with a length of 3 meters, which greatly improves the overall stability.

Second, the middle fence:

Common fences are chain link fences and welded wire mesh fences, which are the entire central part of the product. The characteristics of different specifications are not the same. The chain link wire is generally cold-galvanized or hot-dip galvanized wire. The surface is covered with plastic PVC or PE to prevent corrosion and difficult to fade, prolong the service life, and the color of the chain link net can be more beautiful. Welded wire mesh is a type of wire mesh welded with iron wires. The surface is generally treated with galvanizing, dipping and spraying. The connection points of the welded mesh are locked, which can make the fence more solid and suitable for use as a mesh wall.

Third, the top net:

The top mesh is generally made of nylon mesh and polyethylene. Polyethylene is often used because of its good water absorption and light transmission.

The stadium fence is mainly composed of three parts: the frame, the fence and the top net. It is often installed on the site. The net pillars and the fence are constructed on site. The structure, shape and size can be adjusted at any time according to the site requirements. Stepped installation provides the ideal solution.

Peach Post Fence

The surface treatment of our common stadium fences generally has two types of dipping and spraying. What are the differences between these two modes? Let us analyze and explain them below.

First we sandblasted the stadium fence. Then, the electrostatic powder is sprayed on the surface of the column, and the electrostatic powder is used to charge the plastic powder, adsorbed on the surface of the column, and then baked at high temperature to melt the powder and adhere to the surface of the column. For example, fitness equipment, refrigerator tray racks, solar surfaces, community fence surfaces, etc. in our lives.

The fence of the dip plastic stadium is to heat the accessories such as the pillars at high temperature, and then immerse the pillars and the like into the powder pool. The parts are then hung on a cart and transported to a leveling room for leveling. For example, our daily clothes hangers, handles of pliers, rubber covers on scissors, various armrests, etc.

Relative to these two processes, the cost of powder coated mesh panel fencing is lower, because the price of dipping powder is lower than that of iron, but after the product is finished, the quality of spraying is better than that of dipping, and the weight is also heavier. Both are fine and smooth.

The colors of both processes can be yellow, red, white, blue, green, and black. The impregnated product is based on steel and the weather-resistant polymer resin as the outer layer (0.5-1.0mm thick), which has the characteristics of corrosion resistance, rust resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good feel, environmental protection and long life , Is a replacement product of traditional paint, galvanized coating film, and has a wide range of uses.