The Heat Efficiency Of The Heat Resistant Conveyor Belt Has Been Significantly Improved

Author:hyconveyorbelt 2020-04-10 11:23:21 294 0 0

Heat Resistant Conveyor Belt is widely used in the transportation of cement, coking, metallurgy, chemical, steel and other industries. Usually the belt core fabric is woven from the thread by a weaving machine. The core layer of the conveyor belt needs to be finished with the finished surface. The inner layer is subjected to multiple dipping and multi-lamination adhesives. After vulcanization, after the surface layer of the glue is dried, the inner layer of the glue is not completely vulcanized. After the inner layer of the glue is completely vulcanized, the surface is The rubber has been aging, resulting in high scrap rate of the product. Because the surface layer and the inner layer are dipped, the amount of glue is large, the production process is complicated, the adhesion between the surface layer and the inner cloth is not good, and it is easy to get cloth or fall off. The quality of the product is poor and the service life is short, which brings unnecessary trouble to the production and affects the production efficiency.

In order to increase the strength of the skeleton material of the Heat Resistant Conveyor Belt, the strength of the skeleton material can be improved by both high fiber strength materials and changing the fabric structure. In recent years, new synthetic fibers have emerged, and the strength of fabrics for heat-resistant conveyor belts has been continuously improved. The thickness of fabrics with the same level of strength has gradually decreased. Therefore, the flexibility and flex resistance of the conveyor belt have been obtained. Great improvement. The straight-through weft fabric has a significant improvement in the strength efficiency of the fabric due to the reduction of the mutual wear of the warp and weft threads and the loss of the warp and weft of the manufacturing process.

Heat Resistant Conveyor Belt should avoid the tape being blocked by the frame, pillar or block material, preventing the use of the tearing conveyor belt. Precautions with the rubber belt in the industrial production, multi-variety, high performance, lightweight Multi-functionality and long life are several aspects that manufacturers pay attention to. The type, structure and number of layers of the conveyor belt should be selected according to the conditions of use. The running speed of the conveyor belt should not be more than 2.5 m / s. The material with large block size and large wear should use the fixed force type unloading device, and the low speed should be used as much as possible.

We also have Cold Resistant, Acid-alkali Resistant Conveyor Belt for you. If you want to know more about conveyor belts, feel free to contact us.


Comments   Please sign in or sign up to post.

0

0 of 500 characters used

Copyright:@2020-2021