Carbon Fiber Adhesive Primer

Carbon Fiber Adhesive Primer

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

Features:

*A high performance adhesive primer designed to create a high bonding strength and ensure maximum stress transfer between concrete and carbon fiber reinforced materials

*Excellent sealing and bonding strength for concrete

*Particularly suitable for low grade concrete with many small capillary pores 

*Fast and easy stirring ensures accurate mixing proportion, when properly mixed, adhesive will be an even color for use

*Mixed adhesive should be used up within 20 minutes (depending on specific ambient temperature), the density is about 1.10~1.15 g/cm3 (cured), gel time is about 1~6 hours

Carbon Fiber Adhesive Primer Manufacturer:Nanjing Mankate Science & Technology Co., Ltd.

Applications:

● Adhesion of various fibers, such as carbon fiber, basalt fiber, glass fiber, aramid fiber (kevlar fiber), etc.

● Widely used for carbon fiber materials, high initial adhesion and sustained tensile strength, especially strong permeability for carbon fiber sheet

● Wide working temperature range: 5℃~ 40℃, available in all working conditions, including dry, wet and underwater environment

● Excellent thixotropy and nearly non-drip for horizontal, vertical and overhead applications, low flowability for vertical construction