Pattern Roller with Handle basics

The roller brush, also known as the roller, is divided into three types: long hair, medium hair, and short hair. It is a tool for large-area paint roller coating.

Use can be coated with a large area of paint

There are three types of the roller brush, long hair, medium hair and short hair.

Roller brush:

Roller brushes are often used in the rolling of large areas of paint for everyday architectural projects;

Roller brush introduction:

Also known as the roller, it needs to be matched with the roller brush used in the lacquer plate. Because it has a wide rolling surface, it is the most labor-saving and time-saving brush. Especially after connecting the extension rod, it can easily paint the wall height or the ceiling, but the disadvantage It is easy to produce the situation of paint splashing, so the hair of the roller brush should not be too short, but it must be thin, so that the paint film that is brushed out will be delicate;

Classification of roller brushes:

The roller brush is divided into three types: long hair, medium hair and short hair. It is expressed as the length of the roller bristles, not the thickness and length of the roller itself. The bristles are usually divided into two types: wool and chemical fiber.

Different roller brushes will paint different effects and long hair roller will paint some fine texture, which has a concave and convex feeling, similar to the texture effect. After the short-haired roller is painted, the paint surface is relatively uniform, smooth, and has no unevenness, and the middle hair is between the two.

The roller brush is mostly made of wool and foam plastic. It can be divided into paint roller brush, brush roller brush, floor paint roller brush, flat coating roller brush, etc. It is mainly used for large-area coating roller coating for architectural decoration projects. And can be used to roll a variety of blending paint, such as latex paint, anti-rust paint, interior and exterior wall paint, wallpaper paste glue.

Precautions:

Use the roller brush as long as it is straight brushed. If you want to apply it evenly, the roller should be fully absorbed when it is put into the paint bucket, then take out a few turns on the inclined surface, press out the excess paint and start to paint the wall.

As a Custom Soft Pattern Roller Manufacturer, let's introduce other brushes:

Soft rubber printing roller, liquid wallpaper paint knurling construction tool. Make a tool with patterned flowers on the wall.

The soft rubber roller is matched with the knurling machine, and the desired color material is selected, and the pattern can be constructed on the wall surface.

6" Pattern Roller

Different flowers roll to make different pattern effects. 6" Pattern Roller, used with the decorative machine. Pour the adjusted metal paint or knurling paint or color paint in the decorative box. (Add a certain proportion of water to the paint, adjust the concentration, adjust the paint. Pour into the original paint, this will affect the deterioration of the original paint. Pick the flower roll, try it on the cardboard first, the pattern is positive and negative, adjust the flower roll, so that the pattern on the wall meets our aesthetic; whether it is to the flower, refer to a reference point of the flower roll for orderly operation;

According to the Pattern Roller With Handle, the points are opposite to the flowers and the opposite points are to the flowers; according to the effect of the construction, the flowers, and the canines are horizontally divided. Of course, you can also pay attention to the flower, each different pattern, first study its law on the cardboard, the distance between each line of the pattern, the positioning is accurate. It is possible to carry out the operation on the wall.

After doing a good job, build on the wall from left to right and top to bottom. Grasp the line spacing of the next column pattern and the previous column pattern, and then carry out the flower roll printing.