200Hz /10kvA intermediate frequency generating set

Structure:

Ø One set of  4 KW asynchronous motor (3 phase,50Hz,380V,speed 1430 -1440r/min)

Ø One set of 10kvA Synchro generator is an intermediate frequency  wide voltage separately excited generator. (125Hz,3phase,20- 240V, power factor:0.3)

Ø One set of control cabinet  with  voltage regulator

Ø One set of connection parts. (such as chassis,coupling and so on).

Main technical data and operationg condition:

Ø Generally, the main body of a M+G set  will be fixed on a steel frame chassis .

Ø Speed range of  asynchronous motor : 1430-1440rpm when 4 grade running.

Ø Synchro generator is a 10 pole intermediate frequency wide voltage separately excited generator.(when the power supply frequency is 50Hz)

Ø Generator excitation is separately excited way ：It can stabilivolt running under given voltage condition. (scorp: voltage is 20 -  240 under 125Hz  and Continuous adjusted setting).

Ø Rated output power: (125Hz): 3 phase, 10kvA , 20-240V, power factor 0.3 (hysteresis).

Ø Power factor: 0.4 (hysteresis)

Ø Class of insulation: B

Ø Class of  Protection :IP44

Ø Installation type: IMB3

Ø Cooling : IC01

Operating conditions:

Ø Atmospheric pressure: 100kPa

Ø Ambient temperature: 40℃

Ø RH: less than 90% (20℃)

Ø Altitude:≤1000m

Mode of operation :

Periodicity running (3 phase full load or 2 phase 6kvA full loading 1 hour, no loading 1 hour), continuous running: at least 4 hours.

Ø Wave form distortion rate: ≤5% (no load line voltage).

Ø setting range of output voltage: when 125Hz, 20 – 240V Continuous adjusting ( stabilivolt running under given voltage condition).

Ø Noise ：≤108dB(A) (Voice level)

The CT, VT Test we can supplied , including CT, VT Routine Test, CT, VT Accuracy , Error Measurement Test, we have rich experience and perfect after-sale service. If you are interested in , you can call us at any time.