Installation and selection of fluoroplastic lined centrifugal pumps

In the industrial field, fluoroplastic lined centrifugal pumps are widely used in various chemical, pharmaceutical, petroleum and other industries due to their unique performance and advantages. This article will introduce the installation and selection points of fluoroplastic lined centrifugal pump in detail.

PFA lined centrifugal pumps

Installation points

1. Stable foundation: Make sure the installation foundation is flat and firm to avoid vibration of the pump during operation.

2. Correct connection: Install the pump in strict accordance with the requirements of piping connection and pay attention to sealing to prevent leakage.

3. Power wiring: the connection of power lines should comply with electrical safety standards.

4. Axial level: Ensure the axial level of the pump to avoid tilting causing operation failure.

5. Lubrication and cooling: add appropriate amount of lubricant or coolant as required.

6. Test run: After installation is completed, carry out the necessary test run to check the running status of the pump.

The main points of selection

1. flow and head: according to the process to determine the required flow and head. 2.

2. Medium nature: Consider the temperature, corrosivity, viscosity and other factors of the medium.

3. pump material: choose the fluorine plastic lining material suitable for the medium to ensure corrosion resistance.

4. power and efficiency: according to the actual demand to select the appropriate power and efficiency.

5. sealing form: according to the nature of the medium and working conditions to choose the appropriate sealing form.

6. Brand and quality: choose well-known brands and reliable quality products.

7. cost considerations: under the premise of meeting the demand, consider the cost factor.

In short, the correct installation and selection is to ensure the normal operation of fluoroplastic lined centrifugal pumps and play the key to the best performance. In the selection process, various factors should be considered comprehensively to meet the process requirements and reduce operating costs.

I hope this article can help you, if you have other questions or need further help, please feel free to visit www.hkpump-valve.com