INR18650-2200mAh battery,2000mAh Li-ion battery supplier

Author:sppowerbattery 2020-02-15 14:07:35 365 0 0

INR18650-2200mAh battery,2000mAh Li-ion battery supplier,lithium ion battery for power tool,power tool lithium ion battery supplier

 

2200mAh Li-ion battery Product Details:


  NO.

Items

Specifications

1

Model

INR18650-2200

2

Can Material

Ni-Iron

3

Rated Capacity

2200 mAh0.2C5A

4

Nominal Voltage

3.7V

5

Max. Charge Voltage

4.2 V

6

Discharge Cut-off Voltage

2.75V

7

Max. Charge Current

1 C5A

8

Standard Discharging Current

0.5 C5A

9

Max. Continuous Discharge Current

11 A

10

Max. Pulse Discharge Current

30A 2s pulse  

11

Max. Diameterinclude PET

≤18.40 mm

12

Max. Height (include PET)

≤65.50mm

13

Weight (Approx.)

44.0g

14

Impedance Max. at 1000Hzcharged status

≤ 18 mΩ

15

Charge Method (CC/CV)

Standard

0.2 C5A×5hrs

Quick

1 C5A×2.5hrs.

16

Operating Temperature

Charge

0℃45℃ 32oF113oF

Discharge

-10℃60℃ -4oF140oF

Storage

-20℃45℃ -4oF113oF

 

Characteristic  of  2200mAh Li-ion cylindrical battery

Without special instructions, the following tests should be done under the condition of : temperature(23℃±3℃), atmospheric pressure (86KPa106KPa), relative humidity (45%85%), and the tests should be done within two weeks after receiving the products.

the definitions of some nomenclatures of this specification

standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23℃±3℃ surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A.

 

Electrical Characteristic  for Cylindrical Rechargeable Electric vehicle li-ion Battery

 

NO.

 Item

 Standard

Test Method

1

Discharge rate capabilities

A1 C5A ≥97% B5 C5A ≥95%

Standard charged under the condition of   normal atmospheric pressure and the environmental temperature of 23℃±3℃   and45%85%RH, then rest for 30mins and discharge at1C5A5 C5A10 C5A to the   discharge cut-off voltage respectively. Charge/discharge cycle can be   conducted for 3times before meeting the Standardsthe same below

2

capacity retention and recovery

Residualcapacity≥94 %

Recoverablecapacity≥*98%

Standard charged under the condition of   normal atmospheric pressure and the environmental temperature of 23℃±3℃ Stored for 28   days, then discharge at 0.2 C5A to 2.50Vmeasuring residual capacity; Then   standard charge/discharge measure recoverable capacity.


         3

Low TemperaturePerformance

discharge capacity≥85% rated capacityno   distortion and no rupture

The cell shall be charged in accordance   with the standard charge. Then stored in the temperature of -10℃±1℃ for4h,   Discharge at the constant current of 0.2C5A down to the end-of-discharge   voltage 2.750V.

4

Cycle Life


Charge: The cell shall be charged in   accordance with RapidCharge condition. rest for 10mins.Discharge : 5C5A   discharge to 2.75V, one cycle is finished, then rest for 30mins. Then repeat   above steps, when capacity is less than 80% of initial capacity, the battery   life is over.

 

Warranty Period & Product Liability  for  car 18650 battery

 

Warranty period of this product is 12 months from manufacturing code. JIANGSU SUNPOWER CO., LTD. is not responsible for the troubles caused by mishandling of the battery which is against the instructions in this specification.

 

standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23℃±3℃ surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A.

 

Storage  

The cell shall be stored at the environmental condition of -20℃ - 45℃ and 65%±20% RH. The voltage for long time storage shall be 3.6V-3.9V range. If the cell has to be storied for a long time (Over 3 months), the environmental condition should be: Temperature: 23℃±3℃ Humidity: 65%±20RH please activate the battery once every 3 months according to the following method: Charge with current 0.2C5A until the voltage achieve to 4.0V.

 

The company founded in 2014, focus on producing cylindrical power lithium-ion batteries. The company supply Electric vehicle cylindrical lithium battery, which include 1500mAh, 1300mAh, 2000mAh, 2200mAh, 2500mAh, 2600mAh Li-ion battery and 3000mAh Li-ion battery. All adopt the most advanced extrusion coating production technology and yearly production reaches to 250 million Ah power type 18650 High security lithium ion battery. Our products have high quality and competitive prices.

If you want to learn more about the High security lithium ion battery, please visit here.

 

https://www.sp-powerbattery.com/


Comments   Please sign in or sign up to post.

0

0 of 500 characters used

Copyright:@2020-2021