YARWAY BLOW-OFF VALVES

YARWAY BLOW-OFF VALVES

Fisher Control Valve

BLOW-OFF VALVES manufacturer

SEATLESS, HARDSEAT AND UNIT TANDEM

Designed for blow-off service in boiler systems with pressures of 3206 psig

FEATURES

• Designed according ASME section 1, ASME B31.1, ASME B16.34.

• For boiler systems up to 3206 psig.

• Rugged construction to withstand high pressure and high velocities.

• Excellent resistance to cleaning acids and wear caused by precipitated solids.

Seatless valves

• No Seat

- will not score or plug with dirt

- will not leak

• Live-loaded packing

- will not leak after packing

• Slow opening

-will not rapidly drain boiler drum

Unit tandem valves

• Combination of hardseat and seatless valves in a single body

- eliminates pipe joints

- reduces potential leaks

- fits into a confined space

Hardseat valves

• Stellite seat faces

- resists wear

provides long service life

GENERAL APPLICATION of china low noise displacement pumps

Blow-off service in boiler systems to remove dirt, sediment and scale as well as maintain boiler level surge.

Size range: NPS 1, 1¼, 1½, 2, 2½

TECHNICAL DATA

[DN 25, 32, 40, 50, 65]

Pressure Rating: Up to 3206 psi Connection: Flanged, Socketweld, Buttweld Materials: Cast Iron, Carbon Steel

GENERAL DESCRIPTION of BLOW-OFF VALVES

Basic requirements for the design and use of blow-off valves are established by the ASMEPower Boiler Code, Section l. The general form of a valve, the materials of its construction,allowable boiler pressures, and the installation of the valve are all determined by the code.

Yarway blow-off valves are designed in conformance with all code requirements (ASME Section l, ASME B31.1, ASME B16.34).

Because the primary purpose of a blow-off valve is removal of dirt, sediment and scale, the boiler code requires that valves whichhave dams or pockets in which sediment can accumulate cannot be used in blow-off service. This means that ordinary globe valves cannot be used as blow-off valves.

Yarway valves are especially designed for the punishment of blow-off service in boiler systems with pressures of 3206 psi.

The rugged construction of these Quiet vacuum pump can successfully withstand the combination of problems inherent in the service - a service in which high pressures result in high velocities which can cause wire drawing and cavitation of metal surfaces.

The valves must also withstand the corrosive environment created by acid cleaning of boilers, and the potential wear problems caused by precipitated solids.

The valves are also helpful in maintaining boiler level surge within desirable limits during quickstartup of high pressure systems.

Two broad categories of Yarway blow-off valves are available; those that operate on a slidingprinciple and those that operate on a seat-and- disc principle.