7.50mm & 7.62mm Screw Terminal Block

7.50mm & 7.62mm Screw Terminal Block

Rising clamp：RHTBY29-7.50&7.62

PCB Terminal Block Rising clamp is available at RHT. 

We have been selling on the markets many years and get good feedback.

Please view our large selection of  PCB Terminal Block Rising clamp. Any questions,Please contact our sales team to get any service support.

If you need any samples,quick L/T, and etc, we will try our best to support.

Features

-Material:Terminal blocks are commonly made from materials like brass, with a tin-plated surface to prevent corrosion and improve conductivity.

-Mounting Options:They may come with options for PCB (Printed Circuit Board) mounting or chassis mounting, depending on the application requirements.

-Current Rating:They are designed to handle specific current ratings, typically ranging from a few amps to tens of amps, depending on the size and construction.

-Voltage Rating:Voltage ratings can vary but are typically suitable for low to medium voltage applications.

Applications

1.Industrial Control Systems

2.Power Distribution

3.Renewable Energy:

4.Consumer Electronics

Specifications

Electrical 

Rated voltage:300V

Rated current:20A

Contact resistance: 20mΩ

Insulation resistance: 500MΩ/DC500V

Withstanding Voltage: AC1600V/1Min

Wire range:26-12AWG2.5mm²

Material 

Screws: M3 steel Zinc plated

Pin header: Brass, Sn plated

Housing: PA66, UL94V-0

Mechanical

Temp. Range: -40ºC~+105ºC

MAX Soldering: +250ºC for 5 Sec.

Torque: 0.5Nm (10.6lb.in)

Strip length: 6~7mm