HL-5300 spring lever with plastic rod limit switch

HL-5300 spring lever with plastic rod limit switch

Heavy Duty Limit Switch

Heavy duty limit switches are often used to control heavy-duty equipment, such as cranes, conveyors, and heavy material handling equipment. They are commonly used in harsh industrial environments. These heavy-duty limit switches are sometimes used in conjunction with control limit switches and are often used as a back-up protection for control limit switches, disconnecting the motor power supply in the event of a control limit switch failure, or if the contactor is stuck or fused.

TMAZTZ offers a wide range of heavy duty limit switches in a variety of sizes, housings, and operating heads/levers, where you can find the right heavy duty limit switch for your application, contact us to select the right control switch for your application.

Features of heavy-duty limit switches

1.Sturdy die-cast body;

2. Epoxy resin coating;

3. With multiple mounting and actuator options;

4. Also available in low and high temperature construction and factory sealed pre-wired versions;

5. Multiple operating heads;

6. Stainless steel version material.

Ratings

NOTES:

1.Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).

2.Lamp load has an inrush current of 10 times the steady-state current,while motor load

has an inrush current of 6 times the steady-state current.

3.Product with spring, its usable range of operating part is within one third of the whole.

spring length from the front end of spring.

Characteristics

 Operating Characteristics

NOTE: Above data based on the lever length:31.5mm of tmaztz HL series.

OF and RF base on lever length 75mm(HL-5030)and 145mm(HL-5050).

More info you can view https://www.chinalimitswitch.com/hl-limit-switch/