TZ-8169 cats whisker lever limit Switch
TMAZTZ offer a wide range of whisker limit switches in different sizes. If you have any questions please contact us and we will provide you with the right limit switch for you. We have a perfect quality control system, and you can trust the quality of our products.
Data Ratings
Rated voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
Resistance Load | Lamp Load | Inductive Load (A) | Motor Load | |||||
NC | NO | NC | NO | NC | NO | NC | NO | |
125VAC | 5 | 5 | 1.5 | 0.7 | 3 | 3 | 2 | 1 |
250VAC | 5 | 5 | 1 | 0.5 | 3 | 3 | 1.5 | 0.8 |
8VDC | 5 | 5 | 3 | 3 | 5 | 4 | 3 | 3 |
14VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
30VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
125VDC | 0.4 | 0.4 | ||||||
250VDC | 0.2 | 0.2 | ||||||
Inrush Current | N.C: below 24A, N.O: below 12A |
NOTE:
1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).
2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.
Whisker limit switch characteristics
■ Double-circuit type of limit switch.
■ Compact new design approximately 1/3 the size of TMAZTZ vertical limit switches.
■ With strong zinc cast base, and reinforced plastics outer shell, High. Structure preventing oil, water and pressure.
■ Structure enables the terminal section to be fully opened for easy wiring.
■ Degree of protection: IP65
Operation speed | 0.5mm-50cm/sec |
Operating frequency | Electical: 30 operations/minute |
Contact resistance | 25mΩ max. (initial value) |
Insulation resistance | 100MΩ min. (below 500VDC) |
Shock | Mechanical durable: 1, 000m/Sec2 (about 100G'S) |
Ambient temperature | -5~+65℃ (With no icing) |
Humidity | <95% RH |
Weight | About 130 to 190g |
Degree of protection | IP65 |
Electrical Life | Above 500000 |
Operating Characteristics
Operating Characteristics | Model | TZ-8107 | TZ-8111 | TZ-8112 | TZ-8122 | TZ-8166 | TZ-8167 | TZ-8168 | TZ-8169 | ||
Operating force | OF (Max) | 5.88N | 5.88N | 7.84N | 9.8N | 9.8N | 9.8N | 0.88N | 0.88N | 0.88N | 0.88N |
Release force | RF (Min) | 0.49N | 0.69N | 0.49N | 2.94N | 2.94N | 2.94N | 一 | 一 | 一 | 一 |
Pre-travel | PT (Max) | 20° | 20° | 20° | 1.5mm | 1.5mm | 1.5mm | 30mm | 30mm | 30mm | 30mm |
Over-travel | OT (Min) | 75° | 75° | 75° | 4mm | 4mm | 4mm | 一 | 一 | 一 | 一 |
Movement differential | MD (Max) | 10° | 10° | 10° | 1.2mm | 1.2mm | 1.2mm | 一 | 一 | 一 | 一 |
Total travel | TT (Min) | 95° | 95° | 95° | 5.5mm | 5.5mm | 5.5mm | 一 | 一 | 一 | 一 |
Operational position | OP | 一 | 一 | 一 | 26±0.8mm | 一 | 一 | 一 | 一 |
Copyright:@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used