Copper Knitted Mesh is one of the main components of wire mesh demister and other separation engineering filter parts for Gas Liquid Filtration. Flat copper mesh demisters serve well in deleting the particle mixture in foam, liquid and air, by way of distillating, absorbing, evaporating and filtering process. Forms of processing include tubes, tapes, gaskets and pads. This mesh filters are used in industries of petroleum, chemicals, metallurgy, machine, pharmaceuticals, automobile and environmental protection.
Major products:
Knitted copper mesh ( Copper and alloy)
Tubular knit copper mesh ( Copper and Tin Plated Copper )
Application:
Knitted Copper Meshes are mainly used for demister filter pads and other processing:
Gas-liquid separation filter, gas water separation, oil-water separation equipment;
Various filters on the engine cars, tractors;
Automotive parts sealing, damping (shock), silencers and exhaust purification element;
Electronics, electrical products electromagnetic interference shielding;
Architectural decoration.
Satin Copper Mesh Netting, Technical specifications: Material: Copper, Aperture: 30 micron
Mesh knit pattern: Tricot knit / satin weave
Mesh opening: 30 holes per inch in both direction at nominally stretched condition.
Mesh size: 4 m x 4m
Knitted Pattern: As shown below
Satin weave pattern:
Ultra fine knitted wire in copper
Tubular Knitted Mesh Tape:
Wire Material: Tin copper wire 0.12 mm in width: 85 mm, 110 mm, 115 mm, 150 mm
Bare copper or tinned plated
Color: Red or white
Purity: Pure copper wire99.9%
| Wire diameter | 0.04mm-0.50mm ( regular wire diameter from 0.20mm - 0.28mm), plus multi-strand twisted woven also is available. |
| Aperture | From (2*3mm) to (4 *5mm) and then to (12* 6mm). Custom hole size available upon requirements. Openings form a large hole and hole cross arrangement (hole dimensions in the longitudinal direction is the same, not the same width) |
| Surface Conditions of knitted wire mesh | Flat-type mesh and pressed into corrugated mesh (width and depth of the corrugations have different specifications). |
| The width of the knitted wire mesh | 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400, 500mm, 600mm and so on |
| Materials | Stainless steel wire, copper wire, brass wire, phosphor bronze wire, galvanized wire, nickel wire, monel 400 wire, titanium wire, etc |
Standard Type, High Efficiency and Damping Types:
Types Gas Liquid Filter: Standard Type
| Model | 40-100 | 60-150 | 140-400 |
| Wire size | diameter: 0.23, 0.1*0.4mm | ||
High Efficiency Type(wrong) High penetration type
| Model | 20-100 | 30-150 | 70-400 |
| Wire size | diameter: 0.230.1*0.4mm | ||
| Model | 60-100 | 80-150 | 200-400 | 80-100 | 90-150 |
| Wire size | diameter: 0.19, 0.1*0.28MM | diameter: 0.12, 0.1*0.3mm | |||
Shock Type/damping Knitted Wire Mesh
| Model | 20-40 | 30-80 | 40-120 | 50-120 |
| Wire size | diameter: 0.21mm | |||
Material: tinned pure copper
Knitted Mesh Width 60mm: two wires, wire diam 0.15mm, one layer,
Knitted Mesh Width 100mm: four wires, wire diam 0.10mm, one layer,
Also, there is another request for flexible tinned copper braids.
Previous: Compressed Wire Mesh Gasket
Copyright：@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used