HIGH SECURITY FENCE

High Security Fencing refers to Security Mesh Panels with Barbed Tape providing high level protection for sites, spaces and extremely limited access to boundries. High security fence system can be constructed with single and double fences ( inner fence and external/ outer fence). High Tensile Weldmesh made of hot dipped galvanized wire is commonly used as fabric for both high security fence panels and gates.

Products Details

High Security Panel Fencing System
High security mesh panels HDG electrically welded complete will all accessories and fittings.

PANEL FENCING TYPE A:
Fencing panels with double arms
High Tensile strength welded wire size 200mm x 50mm wire of 5mm diameter c/w double arm with slots for securing barbed wire and installing the barbed wire complete will all other necessary accessories and fittings all as per specification and requirement.
Main Specifications:
1.Material – Electrical Welded Fusion High Tensile Strength Welded Wire (5mm)
2.Fence Height – 2535mm
3.Fence Length – 2500mm
4.Post Length – 4765mm(1065mm underground)
5.Steel Wire Type – HDG
6.Wire Diameter – 5.0mm Vertical and Horizontal
7.Wire Spacing – 50mm x 200mm HDG

PANEL FENCING TYPE B:
Fencing panels with double arms
High Tensile strength welded wire size 200mm x 50mm wire of 5mm diameter c/w double arm with slots for securing barbed wire & razor wire as well as installing the barbed wire & razor wire complete will all other necessary accessories and fittings as per specification and requirement.

Main Specifications:
1.Material – Electrical Welded Fusion High Tensile Strength Welded Wire (5mm)
2.Fence Height – 2235mm
3.Fence Length – 2500mm
4.Post Length – 4065mm(865mm underground)
5.Steel Wire Type – HDG
6.Wire Diameter – 5.0mm Vertical and Horizontal
7.Wire Spacing – 50mm x 200mm HDG

FENCE TOPS:
Concertina razor wire is installed to the barb wire in similar configuration

ACCESS DOORS FOR FENCE:
Access doors / gates are made with same material of the fence panel and post with the dimensions of 2000mm(H) x 1000mm(W) complete with hinges, bolt latch and padlocks.

Parts for Fixing and Installation:
Mainly following items:
2515mm Wide x 3300mm  Weldmesh with 40mm x 5mm Flat Clamp Bar, 11No. M10x45 Cup SQ Bolt, Nut Washer and Formed Clamp Washer
11.3mm Diameter x 4100mm LG Wire Post
50 x 50 x 5mm Angle x 2376mm Lintel
50 x 50 x 5mm Angle x 600mm Rocker Arm on Flexible Mounting, Fixed to Post with Bracket
40mm x 30mm x 400mm LG DIAG. Bars x 6Nos
40mm x 3mm x 2189mm LG HOR. BRACES/Post
Barbed Tape Coil/Strands fixed to Rocker Arm, top of mesh, and strand of barbed tape fixed bwtween posts
Double security gates: steel gate: 50x50x5 RHS fully welded framework
30x5mm flat clamp frame bolted to welded clamp frame
900 diameter band and rocker bar for fixing

PDF Files for High Security Welded Panel Fence and Security Gates:
Installation of Barbed Tape to Fencing tops
Installation of Fence Panels with Posts and Anti climbing tops
Security Gates: Frames, Infills and Installation

High Security Fencing and Gates - Outer Fencing for Double Wire Fencings

Following materials are recommended as outer fencing in double wire fencing systems:

Hot Dipped Galvanized Panel Fencing

Fencing Products

Access door with bolt latch, weld mesh fabric and concertina barbed tape:

Fencing Mesh
Welded mesh out galvanized wire, electrically welded at every intersection. The horizontal wires have crimp at every mesh. The wire panel has a barbed top of 30mm.

Barbed Wire
Barbed wire shall be three(3) strings of 12 SWG doubled barbed wire with four(4) point-barbs set 3 inches spacing

Welding
The panel fence shall be welded to the post and the welded spot shall be treated with anti corrosive paint. All welds must adhere to BS 4872-1:1982

Fence Posts
Welded Turbular posts are to be galvanized inside and outside complete with all other fittings and accessories as per manufacturer specification and requirements.
Holes to receivedtension wires, barbed wire and fittings shall be drilled to specified diameters. Burning to form holes and cuttings shall not be permitted. All fence posts shall be in continuous unsliced lengths to specified heights, except for cranked top shall be welded with full butt penetration weld.
Panel fence material includes high-quality low carbon steel wire, Al-Mg alloy wire welded into wire mesh fence, with the characteristics of anti corrosion, aging resistence, etc. use electro galvanizing, hot dipped galvanized, powder coated, PVC coated for the sake of anti-corrision, characterized by flexible assemble and durability.

Panel fence can be made into permanent fences, also temporary fences by using different posts to fix.

Main Specifications are:
1. Material – Electrical Welded Fusion High Tensile Strength Welded Wire (5mm)
2. Fence Height – 2535mm
3. Fence Length – 2500mm
4. Post Length – 4765mm(1065mm underground)
5. Steel Type – HDG
6. Wire Diameter – 5.0mm Vertical and Horizontal
7. Wire spacing – 50mm x 200mm HDG

Inner Fencing for High Security Double Perimeter Fencing and Gates

Hot Dipped Galvanized Panel Fence System
This system is electrically welded complete will all accessories and fittings, recommended for inner fencing in high security double perimeter fencing solutions.

1. Hot Dipped Galvanized Panel Fencing
Panel fence made out of electrically welded galvanized wires.
Zinc coating: The materials used are conformto GB/Q235B, B.S. 040A10 standard with the minimum coating thickness of 85 microns in conformity to British Standard BS 729.
Panel fence can be made into permanent fences, also temporary fences by using different posts to fix.

2. Fencing Mesh
Welded mesh of galvanized wire, electrically welded at every intersection.
The horizontal wires have crimp at every mesh.
The wire panel has a barbed top of 30mm.

3. Barbed Wire
Barbed wire of three(3) strings of 12 SWG doubled barbed wire with four(4) point-barbs set 3 inches spacing

4. Welding
The panel fence is welded to the post and the welded spot is treated with anti corrosive paint. All welds must adhere to BS 4872-1:1982

5. Fence Posts
Welded Turbular posts are to be galvanized inside and outside complete with all other fittings and accessories.
Holes to tension wires, barbed wire and fittings shall be drilled to specified diameters.
All fence posts are in continuous unsliced lengths to specified heights, except for cranked top is welded with full butt penetration weld.

Main Specifications:
1. Material – Electrical Welded Fusion High Tensile Strength Welded Wire (5mm)
2. Fence Height – 2235mm
3. Fence Length – 2500mm
4. Post Length – 4065mm(86565mm underground)
5. Steel Type – HDG
6. Wire Diameter – 5.0mm Vertical and Horizontal
7. Wire spacing – 50mm x 200mm HDG

Access Door
The inner fence has access doors to access the isolation zone. The doors dimensions are 2000mm(H) by 1000mm(W) complete with bolt latches and padlocks.

Concertina Razor Wire
Core Wire/Blade Thickness: 2.5/0.5mm
Surface Treatment : Hot Dipped Galvanized
The razor wire installed with the same configuration with the existing barb wire.