TSA-001 sealed plunger actuator Limit Switch
■ Stainless steel idler wheel, punch and spring;
■ Selective M18x1.5 cable gland.
Ratings
Rated voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
Resistance Load | Lamp Load | Inductive Load (A) | Motor Load | |||||
NC | NO | NC | NO | NC | NO | NC | NO | |
125VAC | 5 | 5 | 1.5 | 0.7 | 3 | 3 | 2 | 1 |
250VAC | 5 | 5 | 1 | 0.5 | 3 | 3 | 1.5 | 0.8 |
8VDC | 5 | 5 | 3 | 3 | 5 | 4 | 3 | 3 |
14VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
30VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
125VDC | 0.4 | 0.4 | ||||||
250VDC | 0.2 | 0.2 | ||||||
Inrush Current | N.C: below 24A, N.O: below 12A | |||||||
NOTE:
1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).
2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.
Characteristics
Operation speed | 0.5mm-50cm/sec |
Operating frequency | Electical: 30 operations/minute |
Contact resistance | 25mΩ max. (initial value) |
Insulation resistance | 100MΩ min. (below 500VDC) |
Dielectric Strength | 1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity |
1500VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts | |
1500VAC, 50/60 Hz for 1 minute between each terminal and ground | |
Vibration | 10-55Hz,1.5mm double amplitude |
Shock | Mechanical durable: 1, 000m/Sec2 (about 100G'S) Malfunction: 300m/Sec2 (about 30G'S) |
Ambient Temperature | -10~+65℃ (With no icing) |
Humidity | <95% RH |
Weight | About 195 to 246g |
Electrical Life | Above 500000 |
Degree of protection | IP65 |
Operating Characteristics
Operating Characteristics | Model | TSA-001 | TSA-003 | TSA-012 | TSA-021 | TSA-041 | TSA-031 | TSA-051 | TSA-061 | TSA-071 | TSA-081 |
Operating force | OF (Max) | 7.84N | 7.84N | 7.84N | 3.92N | 3.92N | 3.92N | 3.92N | 1.47N | 1.47N | 1.47N |
Release force | RF (Min) | 3.92N | 3.92N | 3.92N | 0.98N | 0.98N | 0.98N | 0.98N | 0.49N | 0.49N | 0.49N |
Pre-travel | PT (Max) | 1.8mm | 1.8mm | 1.8mm | 20° | 20° | 20° | 20° | 30mm | 30mm | 30mm |
Tripping position | TP±10% | 2.0mm | 2.0mm | 2.0mm | 22.5° | 22.5° | 22.5° | 22.5° | 22.5° | 22.5° | 22.5° |
Movement differential | MD (Max) | 1.2mm | 1.2mm | 1.2mm | 10° | 10° | 10° | 10° | 14° | 14° | 14° |
Over travel | OT (Min) | 4.0mm | 4.0mm | 4.0mm | 75° | 75° | 75° | 75° | 20mm | 20mm | 20mm |
Total travel | TT (Min) | 5.8mm | 5.8mm | 5.8mm | 95° | 95° | 95° | 95° | 50mm | 50mm | 50mm |
Rotary indexing | 22.5° | 22.5° | 22.5° | 22.5° |
visit our website: https://www.chinalimitswitch.com/limit-switch/
Previous: LiFePO4 Battery 3.2V 300AH PRISMATIC CELL
Next: 3 Reasons Every Vehicle Should Use Mobile Data Tablet Tracking Software
Copyright：@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used