HDPE Electro fusion Fittings

HDPE Electro fusion Fittings

Product Features:

1. Non-toxic: It is produced without heavy metal additives and would not be covered with dirt contaminated by bacterium.

2. Corrosion Resistance: resist chemical matters and electron chemical corrosion.

3. Low Installation Costs: light weight and ease of installation, greatly reduce installation costs.

4. High Flow Capacity: smooth interior walls result in low pressure loss and high volume.

5. Longevity: more than 50 years under proper use.

Electrofusion fittings are used to connect HDPE pipes and other plastic pipes that carry liquids. Accessories are available in various sizes. Pipes are easily assembled with fittings. It is possible to change the direction of the pipes or close their ends.

The Electrofusion of HDPE uses electrofusion fittings with small copper wires embedded inside the fittings. An electrofusion processor is then used to run current through these wires, which creates heat that melts the HDPE inside the joint and outside the pipe, resulting in a homogeneous bond and leak-free joint.

All HDPE Electrofusion Fittings must be installed by a qualified and experienced technician.

E-mail: info@rtfpipe.com