Two Common Faults of Flour Milling Machine

As a flour milling machines supplier, I will share it with you.

Steel Structure Wheat Flour Milling Plant

High Temperature the Flour Milling Machine

If the flour milling machine is used improperly, there will be a corresponding temperature rise, which is very unfavorable for our production and processing. Because the increase in temperature will hinder our production efficiency and increase the frequency of our repairs, and I believe this is what most of my friends don't want to see. The mill is an effective machine for processing ore coarse powder materials. In the production and processing process of the mill, because the amount of processed materials is relatively large, the load is relatively large, and the use is more frequent, and the number of wear is more, so it is very likely to be The phenomenon that the temperature of the grinding chamber rises. The occurrence of high temperature in the grinding chamber requires us to solve it, otherwise our equipment processing process will be interrupted, which poses a great threat to our production and development.

For the high temperature of the grinding chamber, we need to be well sealed and lubricated. Because it may be because our mill has insufficient lubrication effect, the friction times increase, and it is inevitable that high temperature will occur. Reasonable lubrication and sealing are beneficial but not harmful to our production and development. Maintain the mill equipment well to make its life longer.

Abnormal Vibration of Flour Milling Machine

If there is a sudden vibration problem during the use of the mill, you must pay attention to it.

First of all, we must explain the reason for the vibration problem. When the main machine of the pulverizer vibrates severely, it should be shut down and checked immediately to see if the grinding roller and grinding ring of the machine are deformed. The deformation of the grinding roller and grinding ring will be very large. Vibration and noise. Therefore, the grinding roller and grinding ring should be replaced in time. In addition, due to the tightness of the anchor bolts and the looseness of the anchor bolts, the main machine cannot be properly fixed. When the material enters, the rotation of the motor will cause the main machine to sway, causing large vibration failures. If this happens, it should be shut down immediately. , Tighten the anchor bolts.