FRP Water Tank Inspection and Maintenance Tips

The glass fiber reinforced plastic water tank is assembled by high-quality SMC water tank board. It is characterized by the use of food-grade resin, so the water quality is good, clean and pollution-free. The product has the characteristics of high strength, corrosion resistance, beautiful appearance, long service life, and convenient maintenance and management. Its performance solves the pollution problems such as water leakage, moss green and steel plate anti-rust coating that are easy to fall off and easy to corrode in the original old-fashioned water tank. However, the new FRP water tank not only has the characteristics of beautiful appearance and good water quality, but also has the characteristics of convenient installation and so on. , in line with the standards of the Construction Industry Bureau, and has now been applied to residential, hotel, restaurant and other buildings. The application of FRP water tanks is very common. Fire water, drinking water, and even ethylene glycol can be installed in FRP water tanks. If it is installed in an ordinary tap water tank, the probability of problems is not high, but if it is installed in some special liquid water tanks, The probability of problems will be greatly increased. Runtuo will teach you some methods of water tank inspection and maintenance.

【Fiberglass water tank check for water leakage】

The method of checking for water leakage is very simple. Look around the water tank to see if there is any leakage of water. If there is, there is an unreasonable installation. If there is no leakage, it means that there is no problem with the water tank. The time to check the leakage of the water tank is generally just after installation After 24 hours, when the water test is accepted, the water tank has been used for a long time and the accessories are somewhat aging.

【Remedial method for water leakage of glass fiber reinforced plastic water tank】

If there is no problem with the water tank board, the leaking places of the FRP water tank are limited, mainly concentrated in several places: at the plugging place, at the sealing strip, and at the flange of the water tank. If it is leaking in the place where the water tank is plugged and the flange is leaking, then apply more glass glue in the leaking place and wait for the glass glue to solidify. If there is water leakage at the sealing strip, it may be that the screws are not tightened. You can try to tighten the screws first. Another possibility is that the water tank has been used for too long. If it still leaks, you need to replace the sealant with a new one.