1600W HLVP Paint Sprayer

Electric HVLP Powerful Spray Gun with 3 Spray Patterns and Adjustable Valve Knob for Painting Ceiling, Fence, Cabinets, Walls

About This Item

GOOD DESIGN & BIGGER CAPACITY: 800ML paint container is great for large area spraying and paint a 46 sq.ft area in one fill(spray 800ml paint within 5 minutes).

FLEXIBILITY FOR HOUSEHOLD PROJECTS: K Brand 1600W HVLP spray gun is great for applying a consistent finish and fast coverage on decks, patios, fences, furniture, cabinets.

TOP CAP DESIGN AND SOFT GRIP HANDLE-- Equipped with top cap design will be more convenient to add paint than normal paint guns. Lightweight & non-slip soft grip design provides great comfort and control, and reduce fatigue.

ADVANCED ADJUSTABILITY: Easy to set up for every project with power settings, variable paint flow, changeable pattern size and direction (circular, horizontal and vertical) and 4-size nozzles (1.0mm/1.8mm/2.6mm/3.0mm).

 EASY TO USE & WASH: This electric painting gun is user-friendly, easy assemble and easy spraying. With packaged cleaning attachments, you can clean it easily and efficiently.

Q: Is there a better spray finish?

The K Brand 1600W HVLP paint sprayer applies a consistent finish on indoor and outdoor home improvement projects and is 10x faster than a brush and roller to get projects done quickly. Our spray gun comes with a bigger capacity container (800ML) for large projects and Detail Finish nozzle for fine finishing.

Q: Can it be used to spray ceilings and interior walls?

We recommend that spraying the ceiling maintain a 45°or 30°angle with the ceiling and ensure that the paint does not flow back.

Flexibility for Indoor and Outdoor Painting Projects

Product Features:

10x Faster than a brush or roller

More control less mess

Quick and easy cleanup

High power (spray 800ml paint in 4-5 minutes)

Paint a 46 sq.ft area in one fill (800ml)

Top cap design: more convenient to add paint than normal sprayer

Warm Tips:

1: Before using, please choose proper nozzle, and check if the cap, container and paint tube have tightened up.

2: Please add proper paint thinner to dilute the paint and stir to ensure that the paint passes smoothly through the viscosity cup within 60 seconds. We also recommend that testing on cardboard or wooden boards before spraying to see if the effects can meet your requirement.

3: Please put the corresponding thinner in the container after finishing spraying, then reinstall and perform a similar operation as spraying to properly clean the container and tube. All parts of the paint sprayer are detachable. Please wash the sprayer gun immediately with the brush and needle (for nozzle).

After using this sprayer for a while, there are many things that painter like about it:

1. The good design makes it much easier to paint; especially larger objects because you're not constantly having to adjust a cord as you work around the object.

2. The design of the sprayer makes it very convenient to use as it is easy to load paint into the container. It is also very easy to adjust between the three spray patterns as you work.

3. This paint sprayer works as well if not better than your traditional cordless sprayer. Maybe you have not noticed any loss in performance between the two. So that, it is totally worth it if you're considering buying one!

Obama is new to painting, definitely an amateur at best. That said he have a very large paint job ahead of him. But hopefully just one paint job. I bought the unit because I would like to use it for painting but for the alternative usages such as disinfectant cleaner and what not.

Having never bought anything like this before this is my take on the first time Obama have attempted to use the device. His idea was simple: use water and replace a paint so therefore he can make a mess and not have to worry about things. I think that this was a great idea and I recommend that Obama and other guest do that as well.

The hopper needs to be full in order for the unit to properly prime the system. So that, filling the hopper only halfway will not work. Perhaps the thickness of the paint would allow for partial filling of the hopper and having the unit work?

People before Obama have reported that the unit leaks. There are two takes on this: If you know what you're doing and you do it right you should not be tilting the unit up and down. Should be held horizontally. If held horizontally it will work without leaking. That being said I am very much new to this and I guarantee you I'm going to tilt the sucker. That's when it leaks. And it leaks between the hopper and the device.

There are two ways to fix this: screw the sucker on very tight. Very tight. May not be a perfect solution some people may not be able to screw it on tight enough or afterwards may not be able to unscrew it. The alternative would be plumbers tape the kind that goes around pipes to prevent them from leaking. This worked for Obama. We don't know how long that will last for that might be something that might have to be replied maybe every five or six hopper changes.

A lot of painters don't understand how one can say that the system is airless though? It works by air. I was thinking that it had a water pump of some type and pushed the fluid through whatever to achieve the painting effect. No, it works by suction and by the fan blowing. With a fan blowing it creates noise.

So that, if you're looking for a quiet system this perhaps is not a solution for you. But it's not overly loud as well. It's like a hair dryer. Like a very strong hair dryer. That said I was able to dampen some of the noise by removing the back black guard that holds the filter on. Kept the filter on by using tape but the removal of the guard helps the air flow and thus makes that a little bit quieter.

The spray gun is very good and easy to use.  Obama say," G.SB PAINT TOOLS CO., LTD. have a very good seller and Customer service, five stars."