Why is stainless steel wire Net Easy affected by the environment?

When using any product, there are some environmental influences. For example, when working with metals, we are susceptible to thermal expansion and cold contraction. Therefore, when we use stainless steel wire mesh, we are very vulnerable to thermal expansion and cold contraction. Sometimes this is inevitable. So today we focus on the stainless steel wire mesh by thermal expansion and contraction phenomenon. Stainless steel woven mesh manufacturers want to help you understand the use of stainless steel mesh skills.

In general, ordinary stainless steel wire mesh has thermal brittleness when working at high temperature, stainless steel wire mesh is the same. Stainless steel mesh in operation will generate heat due to conflict. Due to different manufacturing processes lead to different thermal expansion coefficient of stainless steel wire mesh, when different materials are welded together, it is possible to appear thermal fatigue. When the ambient temperature exceeds 400℃, the intermittent reduction caused by expansion of stainless steel screen conveyor between the whole machine should be fully considered. Of course, there is also a stainless steel screen in contact with inert materials, will cause adverse consequences. The main stainless steel wire mesh parts will become thinner and thinner, resulting in accelerated wear. General stainless steel wire mesh parts on the rust will also affect the roller sensitive rolling. I hope the above introduction can help you to use stainless steel screen.

In order to make our work application can smoothly, generally in the application of the product need to pay attention to a lot of problems, stainless steel screen application is the same. In order to better help us, the stainless steel wire mesh matters needing attention are summarized as follows:

(1) stainless steel wire mesh in use of tension should not be too large. Under the premise of not slipping with the transmission gear and not sagging the material receiving point, it should operate under the minimum initial tension.

(2) different models and specifications of stainless steel wire mesh shall not be connected together on the same machine.

(3) the general requirements of no-load start conveyor, to avoid motor overload and stainless steel screen skidding; Except for special circumstances, all materials on the metal mesh belt should be removed before stopping the machine.

(4) The starting sequence is to open the last conveyor belt (unloading stainless steel screen) first, and then open forward in turn, and finally open the receiving conveyor belt. The shutdown sequence is reversed from the boot sequence.