How to extend the service life of the laser marking machine? Do you know the precations before and when using thw lasr marking machine? Do you know how to maintain it?As a laser marking machine supplier, I'd like to share it with you.

Desktop Laser Marking Machine

Precautions Before Using Laser Marking Machine

1. Check whether the machine can be turned on normally, and whether the main switch of the machine, the laser control switch, and the laser marking system switch are normally turned on.

2. Check whether the lens of the laser field lens is dirty, first wipe it with a special lens cleaning paper dipped in alcohol, and then wipe it with a dry lens cleaning paper.

3. Before use, please check whether the software settings have changed, whether the function keys and indicator lights are normal.

4. Check whether the focal length is within the standard focal length range, and test whether the laser reaches the strongest state.

5. Check whether the laser parameter setting screen is normal and whether the laser parameters are within the setting range.

Precautions When Using Laser Marking Machine

1. The maintenance of the laser marking machine must also be carried out by professionals. Non-professionals are forbidden to disassemble and repair the machine to avoid unnecessary loss or personal injury.

2. No specific system parameters can be changed at will without the permission of the equipment technicians.

3. To prevent electric shock, do not operate with wet hands.

4. Please wear protective glasses when working to avoid strong light stimulation and damage to the glasses.

5. When the machine breaks down and causes an emergency, it should be shut down immediately.

6. It is forbidden to put your hands within the laser scanning range during use.

7. Do not put your head or hands into the machine during the operation of the laser marking machine to avoid personal injury.

Precautions for Laser Marking Machine Maintenance

1. Note that the working environment of the laser marking machine must be kept dry and ventilated.

2. Keep the machine clean, clean the dust, dirt and foreign matter on the surface and inside of the machine, use a vacuum cleaner, alcohol and a dust-free cloth to remove the dust, dirt and foreign matter.

3. Maintenance of the galvanometer. Avoid letting the galvanometer close to objects with strong magnetism, strong electricity, and strong seismic current. 4. Avoid touching the galvanometer with your hands and objects. If the lens is dusty, you can wipe it with a cloth and a small amount of alcohol, pay attention to one-way wipe.

5. Replace the circulating water and clean the water tank: clean up once a week and replace the water inside. Too long time for circulating water in the machine is not good for the machine. The quality and temperature of the circulating water directly affect the service life of the laser tube. It is recommended to use purified water or distilled water. And control the water temperature below 35℃.

6. Troubleshoot the machine regularly.

Huiyao has the laser marking machine for sale, welcome to consult!