EPS Foam Packaging Box Shape Molding Machine

EPS Foam Packaging Box Shape Molding Machine

The EPS Foam Shape Molding Machine is driven by hydraulic pressure and a fast/slow differential system to ensure precise time saving and stable operation for opening and closing the mold.

EPS Foam Shape Molding Machine has two working modes: normal feeding and pressure feeding. The two modes can be switched according to the structure and form of the mold. Can choose automatic, semi-automatic and manual operation mode.

Various heating methods can be selected according to the product form to ensure product quality. The vacuum negative pressure system can ensure low water content, fast forming, and short drying time (or no drying).

EPS Foam Shape Molding Machine Features

By steam heating and air cooling, the eps foam bead becomes a large foam board. The PLC English touch screen is adopted to realize the fully automatic production of various shapes of foam boxes for feeding, heating, air cooling, mold opening, mold closing, and ejection.

EPS Foam Shape Molding Machine adopts Japan, imported touch screen, full English display, intelligent graphical interface control, realizing man-machine dialogue.

Golden Phoenix EPS Foam Shape Molding Machine can be fully automatic and semi-automatic.

Taiwan AIRTCA hydraulic system runs smoothly, with low noise and large clamping force.

The vacuum system speeds up the product forming speed, shortens the cooling time, and reduces the moisture content of the product.

The optimized design is clear and generous, with high strength and high cost performance.

This machine can perform processes such as heating, cooling, feeding, stripping, etc., to adapt to different EPS products.

Complete fault detection system and motor protection system to ensure the safe operation of equipment.

EPS Foam Packaging Box Shape Molding Machine

The EPS Foam Shape Molding Machine is driven by hydraulic pressure and a fast/slow differential system to ensure precise time saving and stable operation for opening and closing the mold.

EPS Foam Shape Molding Machine has two working modes: normal feeding and pressure feeding. The two modes can be switched according to the structure and form of the mold. Can choose automatic, semi-automatic and manual operation mode.

Various heating methods can be selected according to the product form to ensure product quality. The vacuum negative pressure system can ensure low water content, fast forming, and short drying time (or no drying).

EPS Foam Shape Molding Machine Features

By steam heating and air cooling, the eps foam bead becomes a large foam board. The PLC English touch screen is adopted to realize the fully automatic production of various shapes of foam boxes for feeding, heating, air cooling, mold opening, mold closing, and ejection.

EPS Foam Shape Molding Machine adopts Japan, imported touch screen, full English display, intelligent graphical interface control, realizing man-machine dialogue.

Golden Phoenix EPS Foam Shape Molding Machine can be fully automatic and semi-automatic.

Taiwan AIRTCA hydraulic system runs smoothly, with low noise and large clamping force.

The vacuum system speeds up the product forming speed, shortens the cooling time, and reduces the moisture content of the product.

The optimized design is clear and generous, with high strength and high cost performance.

This machine can perform processes such as heating, cooling, feeding, stripping, etc., to adapt to different EPS products.

Complete fault detection system and motor protection system to ensure the safe operation of equipment.