Precautions for the Operation of Sintered Diamond Saw Blades

As a Sintered Diamond Saw Blades Supplier, I will share it with you.

Sintered diamond saw blades can be used to cut hard and brittle materials such as marble, granite, concrete, refractory materials, and ceramics.

Sintered Blade for concrete asphalt

1. The operator should wear relevant protective equipment before operation, such as safety shoes, safety glasses, helmets, and ear protection.

2. The cutting machine should have a protective cover or other safety devices.

3. Check whether the saw blade is damaged or severely deformed before use. If it is damaged, it is strictly forbidden to use it.

4. Check if there is any dirt on the chuck of the cutting machine. If there is dirt, clean it up before installing. Check whether the main shaft bearing or the main shaft or the shaft sleeve is severely worn. If the wear is severe, replace the new shaft sleeve or equipment.

5. When installing the saw blade, the direction marked on the saw blade must be consistent with the direction of rotation of the cutting machine. Inconsistent orientation can easily lead to inaction.

6. If it is a wet cutting saw blade when using it, please add enough cooling water.

7. If you are using a dry cutting saw blade, dry cutting must be idle for a few seconds every 10 to 15 seconds to cool the saw blade. For larger cutting depths, it should be cut step by step. When the dry cutting saw blade is cooled with water, The effect will be better.

8. Curve cutting and side grinding are not allowed during the cutting process. Curve cutting and side grinding are likely to cause the saw blade to crack, drop off or break the substrate.

9. If the cutting is oblique cutting, the cutting depth should not be too large, and you must pay attention to safety during the cutting process. Try not to let your body and the saw blade be on the same plane. If you hear an abnormal sound during the cutting process, you should stop cutting immediately. And check whether the saw blade is damaged, or check whether the saw blade fixing screw is loose.

10. If the saw blade is blocked during use, the saw blade will become blunt. Please use a ceramic grinding wheel or refractory brick to reopen the blade (the blade is to cut ten times on the ceramic grinding wheel or refractory brick), and reopen the blade. The sharpness can be restored later.

11. When you encounter noise or severe vibration during the cutting process, you should stop immediately and check whether the saw blade has cracked or dropped pieces. When cracks or dropped pieces appear, replace the new piece.

12. When cutting, the blade of the saw blade exceeds the cutting material by more than 2mm, which can reduce the edge of the material being cut.

13. If the diameter of the saw blade and the main shaft of the cutting machine do not match, a washer of a suitable size can be fitted, but during the cutting process, pay attention to whether the sintered diamond saw blade is jittery, and if so, check whether the washer is off.

Osprey Tools has been devoting itself to the development and manufacture of diamond tools. And our company has the sintered diamond saw blades of high quality, welcome to consult!