What are the Technical Requirements for Balanced Grinding of Diamond Saw Blades?

As a Diamond Tools Manufacturer, share with you.

The methods of weight removal mainly include drilling, milling, grinding, laser weight removal and corrosion weight removal. Aiming at the characteristics of large diameter, thin thickness, and deep flume of the diamond saw blade substrate in this article, the grinding method is selected.

Laser Welding Saw Blade

Selection of Balanced Grinding Position of Diamond Saw Blade

For the static balance correction of a thin disc rotor with a diameter-to-thickness ratio D/b much greater than 5, it only needs to be performed on a single plane perpendicular to the axis, and this plane is the correction plane. In this study, the diamond saw blade can be regarded as being in a plane, and this plane is used as the correction plane. According to the calculation method of static balance, the correction point can also be expressed by size and angular position. In the measurement and correction of the unbalance, the unbalance is generally expressed in the form of m at the position θ, which indicates the magnitude of the unbalance and its angular position.

The unbalanced vector is the product of the unbalanced mass and the vector radius. Therefore, during static balancing, a large correction radius should be selected within the allowable radius to reduce the unbalanced amount of grinding and reduce the actual workload in the correction work. In this case, considering the structure of the diamond saw blade base, all the grinding positions are selected at the bottom of the base sink.

The water troughs on the diamond saw blade are generally evenly distributed, and the angle between every two water troughs on the saw blade is generally the same. The radius of the unbalanced mass M is r, and the angle α between the centerline of the unbalanced mass and the centerline of the nearest tank can be obtained by the static balance calculation method:

To convert the unbalanced mass M to the mass m at the radius R of the sink, it is only necessary to balance at the symmetry of m.

According to the calculation requirements of the static balance of the rigid rotor, the unbalanced mass on the rotor can be converted into its removal mass at the symmetry point, or it can be decomposed into components at different points. For example, if the correction amount m of the unbalanced mass M is decomposed into two symmetrical components m1 and m2, the angle between them is α. Our company also has Laser Welding Saw Blade on sale, welcome to contact us.

https://www.china-osprey.com/news-technical-requirements-balanced-grinding-diamond-saw-blades.html