MAINTENANCE METHODS OF MODEL CAR

The model cars are not toys that can be exposed and they need reasonable maintenance.

Permanent Maintenance

Permanent maintenance means that the model car is not displayed but placed in a cardboard box and placed in a warehouse. This kind of storage method is relatively safe, but there are several issues to pay attention to:

1. Many model cars are packaged with a white foam base with a cover and a display box. The model car can be effectively protected when placed inside. The model can be stored for a long time by sealing the packaging box with cellophane paper before putting it in the warehouse. There is even no need to put desiccant in the carton.

2.Many model cars do not have a packaging box. They should be wrapped in soft paper. Be careful not to damage the mirrors, antennas and other parts. Find a usable box to place these model cars, and then put them in a large box. Do not put these model cars directly on top of each other in a large box.

3. In addition, the boxes for permanent storage should also be protected from overturning and handled with care. The boxes need to be numbered. Write on the box what model car is in the box to avoid overturning the box to find a model car .

A Modle Car

Display Maintenance

Display maintenance is to display the model car on the model car rack. Attention should be paid to some issues in maintenance during display.

1. Avoid direct sunlight.

Because the paint of a model car will fade under long-term direct sunlight and will accelerate aging in the sun.

2. Pay attention to the temperature in the frame of the model car.

The indoor temperature can be as high as 35 degrees during the hottest summer in the south, and the model car body can still tolerate it.

However, if the model car frame is equipped with spotlights and the heat generated by the lights cannot be effectively dissipated, the local maximum temperature will rise to more than 40 degrees. The plastic parts on the model car will soften, degummed, and deform. The thin plastic assembled model car will be completely deformed.

Therefore, you should avoid installing lights in model car frames. If you want to install lights, you can install spotlights on the outside of the model car frame.

3. Pay attention to dust and moisture.

The gap of the glass sliding door can be sealed with a soft sealing strip. Take out the model car at regular intervals to remove the dust on it.

As a model car supplier, we share with you the keep method of model cars. Please feel free to contact us so that we may discuss your model car requirements.