Do you know the Use of Slurry Pumps in Various Industries?

As a Slurry Pump Manufacturers, share with you.

1. If the head of the submersible slurry pump is too low or the head is higher than the actual requirements, it will cause the flow and the current to rise, then the outlet valve can be closed to increase the resistance to control the current.

2. Water cooling is generally used to dissipate heat. If the motor leaks out of the water without water cooling, the temperature of the motor will rise, which will easily cause the motor to burn out.

3. If you deliver hot water within 80℃, you must use a hot water pump, and use tap water for cooling, otherwise the motor will burn out because the medium temperature is too high.

4. If there is no corresponding leak sensor, the submerged slurry pump should be regularly maintained and replaced with seals.

5. If the power cord is not in good contact, it will also cause the motor to burn.

The circuit of the submerged slurry pump should be checked at all times to prevent it from being burnt out. In addition, if you suddenly feel that its appearance is a bit hot during use, you can temporarily stop the machine at this time to cool down. In addition, please check more when wiring.

The use of slurry pumps in various industries

Metallurgy Slurry Pump

Slurry pumps are often used in coal mines, electric power, and seawater sand selection industries. They are widely used in these industries. Let's understand them together.

Slurry pumps are in the power industry, mainly thermal power plants. In thermal power plants, because a large amount of coal is used for power generation, the slag or ash after coal combustion needs to be removed. The slurry pump is used to remove the ash and slag. After mixing a certain amount of water, the slag is removed by the slurry pump. It is transported to the place where the ash is piled, so sometimes the slurry pump also becomes the ash pump in the power plant.

In the coal washing industry, due to different working conditions, larger coal lump and coal gangue are easy to block, and the design requirements for slurry pumps are very high.

In the field of seawater sand selection, the application of slurry pumps has gradually been recognized by customers. However, when sand is selected in seawater and sand is dug in rivers, slurry pumps are more easily called sand pumps or dredging pumps. Although they are called differently, they can all be called slurry pumps in terms of structural characteristics and pump performance principles. Therefore, in this seawater sand selection, we are often called sand pumps, and used to call dredging pumps in river dredging.

Our company also sells Metallurgy Slurry Pump, please contact us.